12 material differences
Tractor oneJ.I. Case 1294 (DT)1984–1985No measured PTO figureTractor twoNew Holland 48351996–1998No measured PTO figure
Which should you choose?
We will not advise between these two machines, because they were not built in overlapping years (1984–1985; 1996–1998). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
12 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | 1294 (DT) | 4835 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 61.2 hp | 64 hp | — |
| Engine declared | DAVID BROWN AD 4/55 | Iveco 8045.06 R | differs |
| Displacement declared | 3.20 L | 3.61 L | +13% 4835 |
| Maximum torque declared | 172 lb·ft · 233 N·m | 146 lb·ft · 198 N·m | +18% 1294 (DT) |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | Dry double clutch, type 11"/11" | Single-disc dry clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Open centre | — |
| Hydraulic control declared | — | Constant flow | — |
| Pump flow declared | 7.2 gpm · 27.3 L/min | 12.2 gpm · 46.0 L/min | +68% 4835 |
| Rear PTO speeds declared | 540 rpm | 540/540E/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,316 lb · 2,865 kg | 7,209 lb · 3,270 kg | +14% 4835 |
| Wheelbase declared | 83.0 in · 2,108 mm | 92.1 in · 2,340 mm | +11% 4835 |
| Length declared | 135.0 in · 3,429 mm | 156.7 in · 3,980 mm | +16% 4835 |
| Width declared | 70.0 in · 1,778 mm | 72.4 in · 1,840 mm | — |
| Ground clearance declared | 15.0 in · 381 mm | 13.8 in · 350 mm | +9% 1294 (DT) |
| Turning radius, braked declared | 10.4 ft · 3.18 m | — | — |
| Fuel tank declared | 105.7 qt · 100 L | 116.2 qt · 110 L | +10% 4835 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
J.I. Case 1294 (DT) sources
- Source: Traktorenlexikon, “Case 1294”
- Source: Traktorenlexikon, “Case 1390”
New Holland 4835 sources
- Source: Traktorenlexikon, “New Holland 4835 (T)”
- Source: Traktorenlexikon, “New Holland 4835 Turbo”