J.I. Case 1190 or John Deere 1550 (A)?
Which should you choose?
On performance, every comparable figure that differs favours the J.I. Case 1190: hydraulic flow. On features, the John Deere 1550 (A) is ahead on PTO speeds and drive.
- The John Deere 1550 (A) suits PTO-driven implements (mowers, balers, pumps) better on this data: offers 1000 rpm.
- The J.I. Case 1190 suits loader and hydraulic implement work better on this data: 34% (7.4 L/min / 2.0 gpm) more hydraulic flow.
- The John Deere 1550 (A) suits heavy draft work (ploughing, cultivating) better on this data: 18% (384 kg / 847 lb) heavier and four-wheel drive.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 1190 | 1550 (A) | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 28.8 kW (38.6 hp)Traktorenlexikon, “Case 1190” | 28.7 kW (38.5 hp)Traktorenlexikon, “John Deere 1550” | EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 1190 and the 1550 (A). |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 1190 and the 1550 (A). |
| Which pumps more oil for implements? | 29.4 L/min (7.8 gpm)Traktorenlexikon, “Case 1190” | 22.0 L/min (5.8 gpm)Traktorenlexikon, “John Deere 1550” | AheadThe J.I. Case 1190 has 34% more hydraulic flow (7.4 L/min / 2.0 gpm) than the John Deere 1550 (A) (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 1,428 kg (3,148 lb)Traktorenlexikon, “Case 1190” | 2,400 kg (5,291 lb)Traktorenlexikon, “John Deere 1550” | Not comparableNot comparable on three-point lift: the 1190: lift through the full range at the hitch ends, as stated by the source (Traktorenlexikon, “Case 1190”); the 1550 (A): lift at the hitch ends, as stated by the source (Traktorenlexikon, “John Deere 1550”) — not the same quantity, basis and condition. |
| Which is heavier, for traction? | 2,096 kg (4,621 lb)Traktorenlexikon, “Case 1190” | 2,480 kg (5,467 lb)Traktorenlexikon, “John Deere 1550” | Ahead (a fact, not an advantage)The John Deere 1550 (A) is 18% heavier (384 kg / 847 lb) than the J.I. Case 1190 (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | 4,000 kg (8,818 lb)Traktorenlexikon, “John Deere 1550” | No figureNo call on maximum permissible mass: no figure on record for the 1190. |
| Which has the wider choice of gears? | 12Traktorenlexikon, “Case 1190” | 8 to 16Traktorenlexikon, “John Deere 1550” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 1190 and the 1550 (A). |
| Which is faster on the road? | 30 km/h (18.6 mph)Traktorenlexikon, “Case 1190” | 25 km/h (15.5 mph) to 30 km/h (18.6 mph)Traktorenlexikon, “John Deere 1550” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540 rpmTraktorenlexikon, “Case 1190” | 540 rpm / 1000 rpmTraktorenlexikon, “John Deere 1550” | AheadThe John Deere 1550 (A) offers 1000 rpm at the PTO, which the J.I. Case 1190 does not (as stated by the sources). |
| Which PTO runs independently of the ground drive? | — | independentTraktorenlexikon, “John Deere 1550” | No figureNo call on PTO independence: not stated for the 1190. |
| Which drives on both axles? | 2WDTraktorenlexikon, “Case 1190” | Two-wheel or four-wheel driveTraktorenlexikon, “John Deere 1550” | AheadThe John Deere 1550 (A) is available with four-wheel drive; the J.I. Case 1190 is two-wheel drive (as stated by the sources). |
| Which is newer, and what about parts? | 1980–1983 | 1987–1994 | Ahead (a fact, not an advantage)The John Deere 1550 (A) is newer: production began 7 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The J.I. Case 1190 has 34% more hydraulic flow (7.4 L/min / 2.0 gpm) than the John Deere 1550 (A) (both pump flow, as stated by the source).
- The John Deere 1550 (A) is 18% heavier (384 kg / 847 lb) than the J.I. Case 1190 (both unladen weight, as stated by the source).
- The John Deere 1550 (A) offers 1000 rpm at the PTO, which the J.I. Case 1190 does not (as stated by the sources).
- The John Deere 1550 (A) is available with four-wheel drive; the J.I. Case 1190 is two-wheel drive (as stated by the sources).
- The John Deere 1550 (A) is newer: production began 7 years later. We hold no parts-availability data, so there is no call on parts.
- Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Not comparable on three-point lift: the 1190: lift through the full range at the hitch ends, as stated by the source (Traktorenlexikon, “Case 1190”); the 1550 (A): lift at the hitch ends, as stated by the source (Traktorenlexikon, “John Deere 1550”) — not the same quantity, basis and condition.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources