6 material differences · fewer than 12

Tractor oneInternational Harvester W-141938–1939No measured PTO figureTractor twoLanz D 35061936–1952No measured PTO figure

Which should you choose?

We will not advise between these two machines, because their unladen weight differs by more than 25% (37%). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

6 material differences · 1 fields identical or within 5%, which is not counted as material

International Harvester W-14 and Lanz D 3506, field by field
FieldW-14D 3506Gap
Engine
Engine power, claimed claimed19 hp19.6 hp—
Engine declaredINTERNATIONAL HARVESTER 113——
Displacement declared1.85 L——
Transmission
Top speed declared3.1 mph · 5.0 km/h11.5 mph · 18.5 km/h+270% D 3506
Clutch declared—Pedal operated three jaw clutch with clutch brake—
Hydraulics & hitch
Rear PTO speeds declared538 rpm760differs
Weight & dimensions
Unladen weight declared2,899 lb · 1,315 kg3,968–4,718 lb · 1,800–2,140 kgdiffers
Wheelbase declared60.0 in · 1,524 mm66.1 in · 1,680 mm+10% D 3506
Length declared103.0 in · 2,616 mm100.0–115.0 in · 2,540–2,920 mmdiffers
Width declared50.0 in · 1,270 mm56.1–57.9 in · 1,425–1,470 mmdiffers
Ground clearance declared—9.3–9.8 in · 235–250 mm—
Turning radius, braked declared18.0 ft · 5.49 m——

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

International Harvester W-14 sources

Source
  • Source: Traktorenlexikon, “McCormick W-14”
  • Source: Traktorenlexikon, “McCormick F-12-G”

Lanz D 3506 sources

Source
  • Source: Traktorenlexikon, “Lanz D 3506/3507”