9 material differences · fewer than 12
Tractor oneInternational Harvester International 3401958–1963No measured PTO figureTractor twoSAME DA 38 (DT)1952–1957No measured PTO figure
Which should you choose?
Read our verdict on the International 340 and the DA 38 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | International 340 | DA 38 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 37.4 hp | 37.4 hp | — |
| Engine declared | INTERNATIONAL HARVESTER C-135 | SAME DA 1103 | differs |
| Displacement declared | 2.21 L | 3.42 L | +55% DA 38 (DT) |
| Maximum torque declared | 128 lb·ft · 174 N·m | — | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 15.5 mph · 25 km/h | — |
| Clutch declared | Pedal operated dry Rockford single plate clutch | Pedal-operated dry single-disc clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 9.5 gpm · 36.1 L/min | 3.0 gpm · 11.5 L/min | +214% International 340 |
| Pressure declared | — | 711 psi · 49.0 bar | — |
| Rear PTO speeds declared | 540 rpm | 585 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,194 lb · 2,356 kg | 4,806 lb · 2,180 kg | +8% International 340 |
| Wheelbase declared | 73.5 in · 1,867 mm | 74.8 in · 1,900 mm | — |
| Length declared | 117.0 in · 2,972 mm | 117.7 in · 2,990 mm | — |
| Width declared | 64.0 in · 1,626 mm | 68.1 in · 1,730 mm | +6% DA 38 (DT) |
| Ground clearance declared | 13.0 in · 330 mm | 14.8 in · 375 mm | +14% DA 38 (DT) |
| Turning radius, braked declared | 12.0 ft · 3.66 m | — | — |
| Fuel tank declared | 61.3 qt · 58.0 L | 38.0 qt · 36.0 L | +61% International 340 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
International Harvester International 340 sources
- Source: Traktorenlexikon, “IHC 340”
- Source: Traktorenlexikon, “IHC International 330”
SAME DA 38 (DT) sources
- Source: Traktorenlexikon, “SAME DA 38 (DT)”