International Harvester 885 (A) vs VALMET 655/655-4
11 material differences · fewer than 12
Which should you choose?
Read our verdict on the 885 (A) and the 655/655-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 885 (A) | 655/655-4 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 78.9 hp | 78.9 hp | — |
| Engine declared | INTERNATIONAL-HARVESTER DT-268 | VALMET D 44 D-7 | differs |
| Displacement declared | 4.40 L | 4.40 L | — |
| Maximum torque declared | 201 lb·ft · 272 N·m | 221 lb·ft · 300 N·m | +10% 655/655-4 |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 18.6 mph · 30 km/h | +20% 655/655-4 |
| Clutch declared | Pedal-operated dry Laycock single-disc clutch | — | — |
| Hydraulics & hitch | |||
| Pressure declared | 2,698 psi · 186 bar | — | — |
| Three-point lift at ends declared | 5,238 lb · 2,376 kg | 9,921 lb · 4,500 kg | +89% 655/655-4 |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 7,363 lb · 3,340 kg | 8,289 lb · 3,760 kg | +13% 655/655-4 |
| Wheelbase declared | 88.2 in · 2,240 mm | 93.9 in · 2,385 mm | +6% 655/655-4 |
| Length declared | 147.2 in · 3,740 mm | 177.8 in · 4,515 mm | +21% 655/655-4 |
| Width declared | 75.6 in · 1,920 mm | 83.9 in · 2,130 mm | +11% 655/655-4 |
| Height declared | 103.9 in · 2,640 mm | 105.1 in · 2,670 mm | — |
| Ground clearance declared | 12.2 in · 310 mm | 18.7 in · 475 mm | +53% 655/655-4 |
| Turning radius, braked declared | 11.6 ft · 3.55 m | — | — |
| Fuel tank declared | 118.3 qt · 112.0 L | 190.2 qt · 180.0 L | +61% 655/655-4 |
International Harvester 885 (A) sources
Source
- Source: Traktorenlexikon, “IHC 885 (XL)”
- Source: Traktorenlexikon, “IHC 884”
VALMET 655/655-4 sources
Source
- Source: Traktorenlexikon, “Valmet 655”