5 material differences · fewer than 12
Tractor oneInternational Harvester 885 (A)1981–1990No measured PTO figureTractor twoLamborghini R-480 (DT)1969–1972No measured PTO figure
Which should you choose?
Read our verdict on the 885 (A) and the R-480 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
5 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | 885 (A) | R-480 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 78.9 hp | 78.9 hp | — |
| Engine declared | INTERNATIONAL-HARVESTER DT-268 | LAMBORGHINI FL-1154 | differs |
| Displacement declared | 4.40 L | 4.99 L | +13% R-480 (DT) |
| Maximum torque declared | 201 lb·ft · 272 N·m | — | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 15.5 mph · 25 km/h | — |
| Clutch declared | Pedal-operated dry Laycock single-disc clutch | Pedal-operated dry Walterscheid double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | — | 6.4 gpm · 24.2 L/min | — |
| Pressure declared | 2,698 psi · 186 bar | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 7,363 lb · 3,340 kg | 6,724 lb · 3,050 kg | +10% 885 (A) |
| Wheelbase declared | 88.2 in · 2,240 mm | 89.0 in · 2,260 mm | — |
| Length declared | 147.2 in · 3,740 mm | 136.6 in · 3,470 mm | +8% 885 (A) |
| Width declared | 75.6 in · 1,920 mm | 76.8 in · 1,950 mm | — |
| Ground clearance declared | 12.2 in · 310 mm | — | — |
| Turning radius, braked declared | 11.6 ft · 3.55 m | 11.9 ft · 3.62 m | — |
| Fuel tank declared | 118.3 qt · 112.0 L | — | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
International Harvester 885 (A) sources
- Source: Traktorenlexikon, “IHC 885 (XL)”
- Source: Traktorenlexikon, “IHC 884”
Lamborghini R-480 (DT) sources
- Source: Traktorenlexikon, “Lamborghini R 480 (DT)”