International Harvester 884 vs Renault 80-12 SP
9 material differences · fewer than 12
Which should you choose?
Read our verdict on the 884 and the 80-12 SP → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | 884 | 80-12 SP | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 78.9 hp | 74.0 hp | +7% 884 |
| Engine declared | INTERNATIONAL-HARVESTER DT-268 | PERKINS 4.248 | differs |
| Displacement declared | 4.40 L | 4.07 L | +8% 884 |
| Maximum torque declared | 201 lb·ft · 272 N·m | 200 lb·ft · 271 N·m | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 18.6 mph · 30 km/h | +20% 80-12 SP |
| Clutch declared | — | Dry LuK double clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 11.8 gpm · 44.6 L/min | 8.4 gpm · 31.9 L/min | +40% 884 |
| Pressure declared | 2,698 psi · 186 bar | — | — |
| Three-point lift at ends declared | 5,238 lb · 2,376 kg | 10,075 lb · 4,570 kg | +92% 80-12 SP |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 5,787 lb · 2,625 kg | 6,327 lb · 2,870 kg | +9% 80-12 SP |
| Wheelbase declared | 88.8 in · 2,255 mm | 93.3 in · 2,370 mm | — |
| Length declared | 146.5 in · 3,720 mm | 152.4 in · 3,870 mm | — |
| Width declared | 78.7 in · 1,998 mm | 75.9 in · 1,929 mm | — |
| Height declared | 101.1 in · 2,568 mm | 97.8 in · 2,485 mm | — |
| Ground clearance declared | 12.2 in · 310 mm | 16.5 in · 420 mm | +35% 80-12 SP |
| Turning radius, braked declared | 11.6 ft · 3.55 m | 13.3 ft · 4.05 m | +14% 80-12 SP |
| Fuel tank declared | 81.4 qt · 77.0 L | 86.6 qt · 82.0 L | +6% 80-12 SP |
International Harvester 884 sources
Source
- Source: Traktorenlexikon, “IHC 884”
Renault 80-12 SP sources
Source
- Source: Traktorenlexikon, “Renault 80-12 SP R3151”
- Source: Traktorenlexikon, “Renault 80-14 SP R3152”