7 material differences · fewer than 12
Tractor oneInternational Harvester 8261969–1971No measured PTO figureTractor twoRenault 9211977–1980No measured PTO figure
Which should you choose?
Read our verdict on the 826 and the 921 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 826 | 921 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 90.8 hp | 90.8 hp | — |
| Engine declared | INTERNATIONAL HARVESTER C-301 | MWM D 227-6 | differs |
| Displacement declared | — | 5.66 L | — |
| Maximum torque declared | 251 lb·ft · 340 N·m | 249 lb·ft · 337 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 15.5 mph · 25 km/h | +20% 826 |
| Clutch declared | Pedal-operated dry single-plate clutch | Dry LuK double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 12.0 gpm · 45.4 L/min | — | — |
| Pressure declared | — | 2,321 psi · 160 bar | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 9,859 lb · 4,472 kg | 8,488 lb · 3,850 kg | +16% 826 |
| Wheelbase declared | 105.0 in · 2,667 mm | 105.0 in · 2,668 mm | — |
| Length declared | 164.0 in · 4,166 mm | 172.5 in · 4,382 mm | — |
| Width declared | 110.0 in · 2,794 mm | 77.0–96.7 in · 1,955–2,455 mm | differs |
| Ground clearance declared | 21.0 in · 533 mm | 17.1 in · 435 mm | +23% 826 |
| Turning radius, braked declared | — | 12.9 ft · 3.92 m | — |
| Fuel tank declared | 147.9 qt · 140.0 L | 123.6 qt · 117.0 L | +20% 826 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
International Harvester 826 sources
Source
- Source: Traktorenlexikon, “IHC 826”
- Source: Traktorenlexikon, “IHC 806”
Renault 921 sources
Source
- Source: Traktorenlexikon, “Renault 921 R7681”
- Source: Traktorenlexikon, “Renault 891 R7681”