International Harvester 786 vs VALMET 705/705-4
12 material differences
Which should you choose?
Read our verdict on the 786 and the 705/705-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
12 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 786 | 705/705-4 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 79.9 hp | 82 hp | — |
| Engine declared | INTERNATIONAL HARVESTER D-358 | VALMET TD 44 DS 7 | differs |
| Displacement declared | 5.87 L | 4.40 L | +34% 786 |
| Maximum torque declared | 251 lb·ft · 340 N·m | 235 lb·ft · 318 N·m | +7% 786 |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | Pedal operated DYNA-LIFE clutch | Pedal-operated, dry LuK single-disc clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 12.0 gpm · 45.5 L/min | 12.7 gpm · 48.0 L/min | +5% 705/705-4 |
| Pressure declared | — | 3,191 psi · 220 bar | — |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 11,590 lb · 5,257 kg | 8,356 lb · 3,790 kg | +39% 786 |
| Wheelbase declared | 104.8 in · 2,662 mm | 93.9 in · 2,385 mm | +12% 786 |
| Length declared | 165.0 in · 4,191 mm | 177.8 in · 4,515 mm | +8% 705/705-4 |
| Width declared | 102.0 in · 2,591 mm | 83.9 in · 2,130 mm | +22% 786 |
| Height declared | 112.0 in · 2,845 mm | 105.1 in · 2,670 mm | +7% 786 |
| Ground clearance declared | 13.0 in · 330 mm | 18.8 in · 478 mm | +45% 705/705-4 |
| Turning radius, braked declared | 11.9 ft · 3.63 m | — | — |
| Fuel tank declared | 199.7 qt · 189.0 L | 190.2 qt · 180.0 L | — |
International Harvester 786 sources
Source
- Source: Traktorenlexikon, “IHC 786”
VALMET 705/705-4 sources
Source
- Source: Traktorenlexikon, “Valmet 705”