International Harvester 785 (A) vs SAME Dorado 70 (DT)

10 material differences · fewer than 12

Tractor one

1981–1990

No measured PTO figure

Tractor two

1995–2000

No measured PTO figure

Which should you choose?

Read our verdict on the 785 (A) and the Dorado 70 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 5 fields identical or within 5%, which is not counted as material

International Harvester 785 (A) and SAME Dorado 70 (DT), field by field
Field	785 (A)	Dorado 70 (DT)	Gap
Engine
Engine power, claimed claimed	75.9 hp	69.1 hp	+10% 785 (A)
Engine declared	INTERNATIONAL-HARVESTER D-246	SAME-DEUTZ-FAHR 1000.4 A 5	differs
Displacement declared	4.03 L	4.00 L	—
Maximum torque declared	190 lb·ft · 258 N·m	170 lb·ft · 231 N·m	+12% 785 (A)
Transmission
Top speed declared	15.5 mph · 25 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated dry Laycock single-disc clutch	—	—
Hydraulics & hitch
Pump flow declared	—	10.7 gpm · 40.5 L/min	—
Pressure declared	2,698 psi · 186 bar	2,176 psi · 150 bar	+24% 785 (A)
Three-point lift at ends declared	4,608 lb · 2,090 kg	4,453 lb · 2,020 kg	—
Rear PTO speeds declared	540/1000 rpm	540/540E/1000 rpm	differs
Weight & dimensions
Unladen weight declared	6,702 lb · 3,040 kg	5,908 lb · 2,680 kg	+13% 785 (A)
Maximum permissible mass declared	—	11,023 lb · 5,000 kg	—
Wheelbase declared	88.2 in · 2,240 mm	88.0 in · 2,235 mm	—
Length declared	147.2 in · 3,740 mm	151.6 in · 3,850 mm	—
Width declared	75.6 in · 1,920 mm	75.6 in · 1,920 mm	—
Height declared	103.9 in · 2,640 mm	95.3 in · 2,420 mm	+9% 785 (A)
Ground clearance declared	15.6 in · 396 mm	17.5 in · 445 mm	+12% Dorado 70 (DT)
Turning radius, braked declared	11.5 ft · 3.51 m	10.5 ft · 3.20 m	+10% 785 (A)
Fuel tank declared	118.3 qt · 112.0 L	95.1 qt · 90.0 L	+24% 785 (A)

Source

Source