International Harvester 785 (A) vs Massey Ferguson MF 372 (A)

8 material differences · fewer than 12

Tractor one

1981–1990

No measured PTO figure

Tractor two

1992–1997

No measured PTO figure

Which should you choose?

Read our verdict on the 785 (A) and the MF 372 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 6 fields identical or within 5%, which is not counted as material

International Harvester 785 (A) and Massey Ferguson MF 372 (A), field by field
Field	785 (A)	MF 372 (A)	Gap
Engine
Engine power, claimed claimed	75.9 hp	70.1 hp	+8% 785 (A)
Engine declared	INTERNATIONAL-HARVESTER D-246	Perkins A 4.236	differs
Displacement declared	4.03 L	3.87 L	—
Maximum torque declared	190 lb·ft · 258 N·m	181 lb·ft · 246 N·m	—
Transmission
Top speed declared	15.5 mph · 25 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated dry Laycock single-disc clutch	—	—
Hydraulics & hitch
Pump flow declared	—	16.9 gpm · 64.0 L/min	—
Pressure declared	2,698 psi · 186 bar	2,466 psi · 170 bar	+9% 785 (A)
Three-point lift at ends declared	4,608 lb · 2,090 kg	4,729 lb · 2,145 kg	—
Rear PTO speeds declared	540/1000 rpm	540 rpm / 1000 rpm	differs
Weight & dimensions
Unladen weight declared	6,702 lb · 3,040 kg	6,173 lb · 2,800 kg	+9% 785 (A)
Wheelbase declared	88.2 in · 2,240 mm	87.3 in · 2,217 mm	—
Length declared	147.2 in · 3,740 mm	147.0 in · 3,734 mm	—
Width declared	75.6 in · 1,920 mm	75.2 in · 1,910 mm	—
Height declared	103.9 in · 2,640 mm	98.1 in · 2,492 mm	+6% 785 (A)
Ground clearance declared	15.6 in · 396 mm	14.2 in · 360 mm	+10% 785 (A)
Turning radius, braked declared	11.5 ft · 3.51 m	—	—
Fuel tank declared	118.3 qt · 112.0 L	79.3 qt · 75.0 L	+49% 785 (A)

Source

Source