International Harvester 785 (A) or Landini 7800 (DT)?

Which should you choose?

On performance, every comparable figure that differs favours the Landini 7800 (DT): three-point lift. It is also ahead on forward gears and top speed.

  • The Landini 7800 (DT) suits loader and hydraulic implement work better on this data: 70% (1,470 kg / 3,241 lb) more three-point lift.
  • The Landini 7800 (DT) suits road haulage better on this data: 20% (5.0 km/h / 3.1 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for International Harvester 785 (A) and Landini 7800 (DT), with the call on each
Question785 (A)7800 (DT)Call
Which puts more power through the PTO shaft?45.6 kW (61.2 hp)Traktorenlexikon, “IHC 785 (XL)”45.5 kW (61.0 hp)Traktorenlexikon, “Landini 7800 DT”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 785 (A) and the 7800 (DT).
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 785 (A) and the 7800 (DT).
Which pumps more oil for implements?49.0 L/min (12.9 gpm)Traktorenlexikon, “Landini 7800 DT”No figureNo call on hydraulic flow: no figure on record for the 785 (A).
Which lifts more on the three-point hitch?2,090 kg (4,608 lb)Traktorenlexikon, “IHC 785 (XL)”3,560 kg (7,848 lb)Traktorenlexikon, “Landini 7800 DT”AheadThe Landini 7800 (DT) has 70% more lift (1,470 kg / 3,241 lb) than the International Harvester 785 (A) (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?3,040 kg (6,702 lb)Traktorenlexikon, “IHC 785 (XL)”3,705 kg (8,168 lb)Traktorenlexikon, “Landini 7800 DT”Ahead (a fact, not an advantage)The Landini 7800 (DT) is 22% heavier (665 kg / 1,466 lb) than the International Harvester 785 (A) (both unladen weight, as stated by the source).
Which may carry more ballast and load?No figureNo call on maximum permissible mass: no figure on record for the 785 (A) and the 7800 (DT).
Which has the wider choice of gears?8 to 16Traktorenlexikon, “IHC 785 (XL)”32Traktorenlexikon, “Landini 7800 DT”AheadThe Landini 7800 (DT) has 100% more forward gears (16 gears) than the International Harvester 785 (A) (both forward gears, as stated by the source).
Which offers a creeper range?No figureNo call on a creeper range: not stated for the 785 (A) and the 7800 (DT).
Which is faster on the road?25 km/h (15.5 mph)Traktorenlexikon, “IHC 785 (XL)”30 km/h (18.6 mph)Traktorenlexikon, “Landini 7800 DT”AheadThe Landini 7800 (DT) has 20% more top speed (5.0 km/h / 3.1 mph) than the International Harvester 785 (A) (both top speed forward, as stated by the source).
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “IHC 785 (XL)”540/1000 rpmTraktorenlexikon, “Landini 7800 DT”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “IHC 785 (XL)”independentTraktorenlexikon, “Landini 7800 DT”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?2WD / 4WDTraktorenlexikon, “IHC 785 (XL)”2WD / 4WDTraktorenlexikon, “Landini 7800 DT”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1981–19901987–2000Ahead (a fact, not an advantage)The Landini 7800 (DT) is newer: production began 6 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Landini 7800 (DT) has 70% more lift (1,470 kg / 3,241 lb) than the International Harvester 785 (A) (both lift at the hitch ends, as stated by the source).
  • The Landini 7800 (DT) is 22% heavier (665 kg / 1,466 lb) than the International Harvester 785 (A) (both unladen weight, as stated by the source).
  • The Landini 7800 (DT) has 100% more forward gears (16 gears) than the International Harvester 785 (A) (both forward gears, as stated by the source).
  • The Landini 7800 (DT) has 20% more top speed (5.0 km/h / 3.1 mph) than the International Harvester 785 (A) (both top speed forward, as stated by the source).
  • The Landini 7800 (DT) is newer: production began 6 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources