International Harvester 784 vs Massey Ferguson MF 372 (A)
9 material differences · fewer than 12
Which should you choose?
Read our verdict on the 784 and the MF 372 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | 784 | MF 372 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 75.9 hp | 70.1 hp | +8% 784 |
| Engine declared | INTERNATIONAL-HARVESTER D-246 | Perkins A 4.236 | differs |
| Displacement declared | 4.03 L | 3.87 L | — |
| Maximum torque declared | 159 lb·ft · 216 N·m | 181 lb·ft · 246 N·m | +14% MF 372 (A) |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 10.1 gpm · 38.2 L/min | 16.9 gpm · 64.0 L/min | +68% MF 372 (A) |
| Pressure declared | 2,698 psi · 186 bar | 2,466 psi · 170 bar | +9% 784 |
| Three-point lift at ends declared | 4,608 lb · 2,090 kg | 4,729 lb · 2,145 kg | — |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm / 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,238 lb · 2,376 kg | 6,173 lb · 2,800 kg | +18% MF 372 (A) |
| Wheelbase declared | 88.0 in · 2,235 mm | 87.3 in · 2,217 mm | — |
| Length declared | 144.1 in · 3,660 mm | 147.0 in · 3,734 mm | — |
| Width declared | 68.9 in · 1,750 mm | 75.2 in · 1,910 mm | +9% MF 372 (A) |
| Height declared | 100.4 in · 2,550 mm | 98.1 in · 2,492 mm | — |
| Ground clearance declared | 15.6 in · 396 mm | 14.2 in · 360 mm | +10% 784 |
| Turning radius, braked declared | 11.5 ft · 3.51 m | — | — |
| Fuel tank declared | 81.4 qt · 77.0 L | 79.3 qt · 75.0 L | — |
International Harvester 784 sources
Source
- Source: Traktorenlexikon, “IHC 784”
Massey Ferguson MF 372 (A) sources
Source
- Source: Traktorenlexikon, “Massey Ferguson MF 372”
- Source: Traktorenlexikon, “Massey Ferguson MF 168 & MF 168A”