5 material differences · fewer than 12
Tractor oneInternational Harvester 7841977–1981No measured PTO figureTractor twoMassey Ferguson MF 184 (A)1980–1983No measured PTO figure
Which should you choose?
Read our verdict on the 784 and the MF 184 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
5 material differences · 7 fields identical or within 5%, which is not counted as material
| Field | 784 | MF 184 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 75.9 hp | 67 hp | +13% 784 |
| Engine declared | INTERNATIONAL-HARVESTER D-246 | Perkins A 4.236 | differs |
| Displacement declared | 4.03 L | 3.87 L | — |
| Maximum torque declared | 159 lb·ft · 216 N·m | 196 lb·ft · 266 N·m | +23% MF 184 (A) |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 15.5 mph · 25 km/h | — |
| Clutch declared | — | pedal operated dry LUK double clutch with 279 mm diameter | — |
| Hydraulics & hitch | |||
| Pump flow declared | 10.1 gpm · 38.2 L/min | — | — |
| Pressure declared | 2,698 psi · 186 bar | 2,418 psi · 167 bar | +11% 784 |
| Three-point lift, at the coupling points declared | 4,608 lb · 2,090 kg | 3,748 lb · 1,700 kg | +23% 784 |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 5,238 lb · 2,376 kg | 5,335 lb · 2,420 kg | — |
| Wheelbase declared | 88.0 in · 2,235 mm | 88.2 in · 2,240 mm | — |
| Length declared | 144.1 in · 3,660 mm | 142.5 in · 3,620 mm | — |
| Width declared | 68.9 in · 1,750 mm | — | — |
| Ground clearance declared | 15.6 in · 396 mm | — | — |
| Turning radius, braked declared | 11.5 ft · 3.51 m | 11.2 ft · 3.42 m | — |
| Fuel tank declared | 81.4 qt · 77.0 L | 64.5 qt · 61.0 L | +26% 784 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
International Harvester 784 sources
- Source: Traktorenlexikon, “IHC 784”
Massey Ferguson MF 184 (A) sources
- Source: Traktorenlexikon, “Massey Ferguson MF 184”
- Source: Traktorenlexikon, “Massey Ferguson MF 168 & MF 168A”