4 material differences · fewer than 12
Tractor oneInternational Harvester 7841977–1981No measured PTO figureTractor twoInternational Harvester 785 (A)1981–1990No measured PTO figure
Which should you choose?
Read our verdict on the 784 and the 785 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
4 material differences · 12 fields identical or within 5%, which is not counted as material
| Field | 784 | 785 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 75.9 hp | 75.9 hp | — |
| Engine declared | INTERNATIONAL-HARVESTER D-246 | INTERNATIONAL-HARVESTER D-246 | — |
| Displacement declared | 4.03 L | 4.03 L | — |
| Maximum torque declared | 159 lb·ft · 216 N·m | 190 lb·ft · 258 N·m | +19% 785 (A) |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 15.5 mph · 25 km/h | — |
| Clutch declared | — | Pedal-operated dry Laycock single-disc clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 10.1 gpm · 38.2 L/min | — | — |
| Pressure declared | 2,698 psi · 186 bar | 2,698 psi · 186 bar | — |
| Three-point lift, at the coupling points declared | 4,608 lb · 2,090 kg | 4,608 lb · 2,090 kg | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 5,238 lb · 2,376 kg | 6,702 lb · 3,040 kg | +28% 785 (A) |
| Wheelbase declared | 88.0 in · 2,235 mm | 88.2 in · 2,240 mm | — |
| Length declared | 144.1 in · 3,660 mm | 147.2 in · 3,740 mm | — |
| Width declared | 68.9 in · 1,750 mm | 75.6 in · 1,920 mm | +10% 785 (A) |
| Height, over the exhaust declared | 100.4 in · 2,550 mm | 103.9 in · 2,640 mm | — |
| Ground clearance declared | 15.6 in · 396 mm | 15.6 in · 396 mm | — |
| Turning radius, braked declared | 11.5 ft · 3.51 m | 11.5 ft · 3.51 m | — |
| Fuel tank declared | 81.4 qt · 77.0 L | 118.3 qt · 112.0 L | +45% 785 (A) |
International Harvester 784 sources
Source
- Source: Traktorenlexikon, “IHC 784”
International Harvester 785 (A) sources
Source
- Source: Traktorenlexikon, “IHC 785 (XL)”
- Source: Traktorenlexikon, “IHC 784”