6 material differences · fewer than 12
Tractor oneInternational Harvester 7561967–1971No measured PTO figureTractor twoLamborghini R-485 (DT)1971–1973No measured PTO figure
Which should you choose?
Read our verdict on the 756 and the R-485 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 756 | R-485 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 75.0 hp | 82 hp | +9% R-485 (DT) |
| Engine declared | — | LAMBORGHINI FL-1154 | — |
| Displacement declared | — | 4.99 L | — |
| Maximum torque declared | — | 206 lb·ft · 279 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 15.5 mph · 25 km/h | +20% 756 |
| Clutch declared | — | Pedal-operated dry WALTERSCHEID double clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 12.0 gpm · 45.5 L/min | 6.4 gpm · 24.2 L/min | +88% 756 |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 8,285 lb · 3,758 kg | 6,669 lb · 3,025 kg | +24% 756 |
| Wheelbase declared | 87.0 in · 2,210 mm | 89.0 in · 2,260 mm | — |
| Length declared | 157.0 in · 3,988 mm | 149.2 in · 3,790 mm | — |
| Width declared | 92.0 in · 2,337 mm | 68.9–96.5 in · 1,750–2,450 mm | differs |
| Ground clearance declared | 17.0 in · 432 mm | — | — |
| Turning radius, braked declared | 10.7 ft · 3.25 m | 11.9 ft · 3.62 m | +11% R-485 (DT) |
| Fuel tank declared | 132.1 qt · 125.0 L | 68.7 qt · 65.0 L | +92% 756 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
International Harvester 756 sources
- Source: Traktorenlexikon, “IHC 756”
Lamborghini R-485 (DT) sources
- Source: Traktorenlexikon, “Lamborghini R 485 (DT)”
- Source: Traktorenlexikon, “Lamborghini R 480 (DT)”