International Harvester 744 or John Deere 2120 (A)?
Which should you choose?
On performance, every comparable figure that differs favours the International Harvester 744: three-point lift and maximum permissible mass.
- The International Harvester 744 suits loader and hydraulic implement work better on this data: 42% (860 kg / 1,896 lb) more three-point lift.
- The International Harvester 744 suits road haulage better on this data: 26% (1,150 kg / 2,535 lb) more maximum permissible mass.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 744 | 2120 (A) | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 42.7 kW (57.3 hp)Traktorenlexikon, “IHC 744” | 42.5 kW (57.0 hp)Traktorenlexikon, “John Deere 2120” | EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 744 and the 2120 (A). |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 744 and the 2120 (A). |
| Which pumps more oil for implements? | 27.2 L/min (7.2 gpm)Traktorenlexikon, “IHC 744” | 28.6 L/min (7.6 gpm)Traktorenlexikon, “John Deere 2120” | EvenEven on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which lifts more on the three-point hitch? | 2,900 kg (6,393 lb)Traktorenlexikon, “IHC 744” | 2,040 kg (4,497 lb)Traktorenlexikon, “John Deere 2120” | AheadThe International Harvester 744 has 42% more lift (860 kg / 1,896 lb) than the John Deere 2120 (A) (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 3,080 kg (6,790 lb)Traktorenlexikon, “IHC 744” | 2,887 kg (6,365 lb)Traktorenlexikon, “John Deere 2120” | EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which may carry more ballast and load? | 5,650 kg (12,456 lb)Traktorenlexikon, “IHC 744” | 4,500 kg (9,921 lb)Traktorenlexikon, “John Deere 2120” | AheadThe International Harvester 744 has 26% higher maximum permissible mass (1,150 kg / 2,535 lb) than the John Deere 2120 (A) (both maximum permissible mass, as stated by the source). |
| Which has the wider choice of gears? | 8Traktorenlexikon, “IHC 744” | 8 to 16Traktorenlexikon, “John Deere 2120” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 744 and the 2120 (A). |
| Which is faster on the road? | 25 km/h (15.5 mph) to 30 km/h (18.6 mph)Traktorenlexikon, “IHC 744” | 20 km/h (12.4 mph) to 25 km/h (15.5 mph)Traktorenlexikon, “John Deere 2120” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540 rpmTraktorenlexikon, “IHC 744” | 540 rpmTraktorenlexikon, “John Deere 2120” | EvenEven on PTO speeds: the same speeds (540 rpm). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “IHC 744” | independentTraktorenlexikon, “John Deere 2120” | EvenEven on PTO independence: every PTO is independent. |
| Which drives on both axles? | 2WD / 4WDTraktorenlexikon, “IHC 744” | 2WD / 4WDTraktorenlexikon, “John Deere 2120” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1974–1980 | 1968–1972 | Ahead (a fact, not an advantage)The International Harvester 744 is newer: production began 6 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The International Harvester 744 has 42% more lift (860 kg / 1,896 lb) than the John Deere 2120 (A) (both lift at the hitch ends, as stated by the source).
- The International Harvester 744 has 26% higher maximum permissible mass (1,150 kg / 2,535 lb) than the John Deere 2120 (A) (both maximum permissible mass, as stated by the source).
- The International Harvester 744 is newer: production began 6 years later. We hold no parts-availability data, so there is no call on parts.
- Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
- Even on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540 rpm).
- Even on PTO independence: every PTO is independent.
- Even on drive: every machine is available with four-wheel drive.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power and a creeper range.
← Every figure for both machines, side by side, with sources