International Harvester 743XL or J.I. Case 1390 (DT)?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the 743XL has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 1390 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 743XL | 1390 (DT) | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 49 kW (66 hp)Traktorenlexikon, “IHC 743XL” | 49.3 kW (66.1 hp)Traktorenlexikon, “Case 1390” | Not comparableNot comparable on power at the PTO shaft: the 743XL has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 1390 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 743XL and the 1390 (DT). |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 743XL and the 1390 (DT). |
| Which pumps more oil for implements? | 32.6 L/min (8.6 gpm)Traktorenlexikon, “IHC 743XL” | 32.9 L/min (8.7 gpm)Traktorenlexikon, “Case 1390” | EvenEven on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which lifts more on the three-point hitch? | 3,151 kg (6,947 lb)Traktorenlexikon, “IHC 743XL” | — | No figureNo call on three-point lift: no figure on record for the 1390 (DT). |
| Which is heavier, for traction? | 3,260 kg (7,187 lb) to 3,430 kg (7,562 lb)Traktorenlexikon, “IHC 743XL” | 2,886 kg (6,363 lb)Traktorenlexikon, “Case 1390” | Ahead (a fact, not an advantage)The International Harvester 743XL is 13% heavier (374 kg / 825 lb) than the J.I. Case 1390 (DT) (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | 5,500 kg (12,125 lb)Traktorenlexikon, “IHC 743XL” | — | No figureNo call on maximum permissible mass: no figure on record for the 1390 (DT). |
| Which has the wider choice of gears? | 16Traktorenlexikon, “IHC 743XL” | 12Traktorenlexikon, “Case 1390” | AheadThe International Harvester 743XL has 33% more forward gears (4 gears) than the J.I. Case 1390 (DT) (both forward gears, as stated by the source). |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 743XL and the 1390 (DT). |
| Which is faster on the road? | 30 km/h (18.6 mph)Traktorenlexikon, “IHC 743XL” | 30 km/h (18.6 mph)Traktorenlexikon, “Case 1390” | EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which offers more PTO speeds? | 540 rpm / 1000 rpmTraktorenlexikon, “IHC 743XL” | 540 rpmTraktorenlexikon, “Case 1390” | AheadThe International Harvester 743XL offers 1000 rpm at the PTO, which the J.I. Case 1390 (DT) does not (as stated by the sources). |
| Which PTO runs independently of the ground drive? | — | independentTraktorenlexikon, “Case 1390” | No figureNo call on PTO independence: not stated for the 743XL. |
| Which drives on both axles? | Two-wheel or four-wheel driveTraktorenlexikon, “IHC 743XL” | Two-wheel or four-wheel driveTraktorenlexikon, “Case 1390” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1981–1991 | 1980–1984 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The International Harvester 743XL is 13% heavier (374 kg / 825 lb) than the J.I. Case 1390 (DT) (both unladen weight, as stated by the source).
- The International Harvester 743XL has 33% more forward gears (4 gears) than the J.I. Case 1390 (DT) (both forward gears, as stated by the source).
- The International Harvester 743XL offers 1000 rpm at the PTO, which the J.I. Case 1390 (DT) does not (as stated by the sources).
- Even on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on drive: every machine is available with four-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- Not comparable on power at the PTO shaft: the 743XL has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 1390 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources