International Harvester 743 or International Harvester 743XL?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the 743 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 743XL has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 743 | 743XL | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 49 kW (66 hp)Traktorenlexikon, “IHC 743” | 49 kW (66 hp)Traktorenlexikon, “IHC 743XL” | Not comparableNot comparable on power at the PTO shaft: the 743 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 743XL has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 743 and the 743XL. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 743 and the 743XL. |
| Which pumps more oil for implements? | 30.0 L/min (7.9 gpm)Traktorenlexikon, “IHC 743” | 32.6 L/min (8.6 gpm)Traktorenlexikon, “IHC 743XL” | EvenEven on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which lifts more on the three-point hitch? | 3,151 kg (6,947 lb)Traktorenlexikon, “IHC 743” | 3,151 kg (6,947 lb)Traktorenlexikon, “IHC 743XL” | Not comparableNot comparable on three-point lift: the 743: lift at the hitch ends, as stated by the source (Traktorenlexikon, “IHC 743”); the 743XL: lift at an unstated point, as stated by the source (Traktorenlexikon, “IHC 743XL”) — not the same quantity, basis and condition. |
| Which is heavier, for traction? | 2,880 kg (6,349 lb)Traktorenlexikon, “IHC 743” | 3,260 kg (7,187 lb) to 3,430 kg (7,562 lb)Traktorenlexikon, “IHC 743XL” | Ahead (a fact, not an advantage)The International Harvester 743XL is 13% heavier (380 kg / 838 lb) than the International Harvester 743 (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | 5,500 kg (12,125 lb)Traktorenlexikon, “IHC 743” | 5,500 kg (12,125 lb)Traktorenlexikon, “IHC 743XL” | EvenEven on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which has the wider choice of gears? | — | 16Traktorenlexikon, “IHC 743XL” | No figureNo call on forward gears: no figure on record for the 743. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 743 and the 743XL. |
| Which is faster on the road? | 30 km/h (18.6 mph)Traktorenlexikon, “IHC 743” | 30 km/h (18.6 mph)Traktorenlexikon, “IHC 743XL” | EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which offers more PTO speeds? | 540 rpm / 1000 rpmTraktorenlexikon, “IHC 743” | 540 rpm / 1000 rpmTraktorenlexikon, “IHC 743XL” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “IHC 743” | — | No figureNo call on PTO independence: not stated for the 743XL. |
| Which drives on both axles? | Two-wheel or four-wheel driveTraktorenlexikon, “IHC 743” | Two-wheel or four-wheel driveTraktorenlexikon, “IHC 743XL” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1980–1989 | 1981–1991 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The International Harvester 743XL is 13% heavier (380 kg / 838 lb) than the International Harvester 743 (both unladen weight, as stated by the source).
- Even on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on drive: every machine is available with four-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- Not comparable on power at the PTO shaft: the 743 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 743XL has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- Not comparable on three-point lift: the 743: lift at the hitch ends, as stated by the source (Traktorenlexikon, “IHC 743”); the 743XL: lift at an unstated point, as stated by the source (Traktorenlexikon, “IHC 743XL”) — not the same quantity, basis and condition.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, forward gears, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources