10 material differences · fewer than 12
Tractor oneInternational Harvester 73881981No measured PTO figureTractor twoJohn Deere 85601989–1993No measured PTO figure
Which should you choose?
Read our verdict on the 7388 and the 8560 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | 7388 | 8560 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 229.9 hp | 232 hp | — |
| Engine declared | INTERNATIONAL HARVESTER DTI-466 | John Deere 6.076 HRW-01 | differs |
| Displacement declared | 7.64 L | 7.63 L | — |
| Maximum torque declared | — | 697 lb·ft · 945 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 21.7 mph · 35 km/h | +17% 8560 |
| Clutch declared | Pedal-operated dry double-disc clutch | Pedal operated hydraulic and oil cooled multi disc clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Closed centre | — |
| Pump flow declared | 16.0 gpm · 60.6 L/min | 43.6 gpm · 165.0 L/min | +172% 8560 |
| Rear PTO speeds declared | — | 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 19,500 lb · 8,845 kg | 32,075 lb · 14,549 kg | +64% 8560 |
| Wheelbase declared | 118.0 in · 2,997 mm | 133.9 in · 3,400 mm | +13% 8560 |
| Length declared | 246.0 in · 6,248 mm | 286.1 in · 7,266 mm | +16% 8560 |
| Width declared | 116.0 in · 2,946 mm | 139.8–150.6 in · 3,550–3,825 mm | differs |
| Ground clearance declared | 12.9 in · 328 mm | 13.9 in · 353 mm | +8% 8560 |
| Fuel tank declared | 775.9 qt · 734.3 L | 882.3 qt · 835.0 L | +14% 8560 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
International Harvester 7388 sources
Source
- Source: Traktorenlexikon, “IHC 7388”
- Source: Traktorenlexikon, “IHC 4386”
John Deere 8560 sources
Source
- Source: Traktorenlexikon, “John Deere 8560”