International Harvester 706 or WHITE 1470?

Which should you choose?

On performance, no comparable figure differs by more than its threshold: on this data the machines are level. On features, the International Harvester 706 is ahead on top speed and PTO speeds.

  • The International Harvester 706 suits PTO-driven implements (mowers, balers, pumps) better on this data: offers 1000 rpm.
  • The International Harvester 706 suits road haulage better on this data: 20% (5.0 km/h / 3.1 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for International Harvester 706 and WHITE 1470, with the call on each
Question7061470Call
Which puts more power through the PTO shaft?51.3 kW (68.7 hp)Traktorenlexikon, “IHC 706”51.5 kW (69.0 hp)Traktorenlexikon, “White 1470”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 706 and the 1470.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 706 and the 1470.
Which pumps more oil for implements?27.5 L/min (7.3 gpm)Traktorenlexikon, “White 1470”No figureNo call on hydraulic flow: no figure on record for the 706.
Which lifts more on the three-point hitch?No figureNo call on three-point lift: no figure on record for the 706 and the 1470.
Which is heavier, for traction?3,758 kg (8,285 lb)Traktorenlexikon, “IHC 706”2,948 kg (6,499 lb)Traktorenlexikon, “White 1470”Ahead (a fact, not an advantage)The International Harvester 706 is 27% heavier (810 kg / 1,786 lb) than the WHITE 1470 (both unladen weight, as stated by the source).
Which may carry more ballast and load?No figureNo call on maximum permissible mass: no figure on record for the 706 and the 1470.
Which has the wider choice of gears?8 to 16Traktorenlexikon, “IHC 706”7Traktorenlexikon, “White 1470”EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the 706 and the 1470.
Which is faster on the road?30 km/h (18.6 mph)Traktorenlexikon, “IHC 706”25 km/h (15.5 mph)Traktorenlexikon, “White 1470”AheadThe International Harvester 706 has 20% more top speed (5.0 km/h / 3.1 mph) than the WHITE 1470 (both top speed forward, as stated by the source).
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “IHC 706”540 rpmTraktorenlexikon, “White 1470”AheadThe International Harvester 706 offers 1000 rpm at the PTO, which the WHITE 1470 does not (as stated by the sources).
Which PTO runs independently of the ground drive?No figureNo call on PTO independence: not stated for the 706 and the 1470.
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “IHC 706”Two-wheel or four-wheel driveTraktorenlexikon, “White 1470”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1963–19671973–1975Ahead (a fact, not an advantage)The WHITE 1470 is newer: production began 10 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The International Harvester 706 is 27% heavier (810 kg / 1,786 lb) than the WHITE 1470 (both unladen weight, as stated by the source).
  • The International Harvester 706 has 20% more top speed (5.0 km/h / 3.1 mph) than the WHITE 1470 (both top speed forward, as stated by the source).
  • The International Harvester 706 offers 1000 rpm at the PTO, which the WHITE 1470 does not (as stated by the sources).
  • The WHITE 1470 is newer: production began 10 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
  • Even on drive: every machine is available with four-wheel drive.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, three-point lift, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources