International Harvester 664 or Landini 7800 (DT)?
Which should you choose?
On performance, no comparable figure differs by more than its threshold: on this data the machines are level. On features, the Landini 7800 (DT) is ahead on forward gears and drive.
- The Landini 7800 (DT) suits heavy draft work (ploughing, cultivating) better on this data: 37% (1,007 kg / 2,220 lb) heavier and four-wheel drive.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 664 | 7800 (DT) | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 45.4 kW (60.9 hp)Traktorenlexikon, “IHC 664” | 45.5 kW (61.0 hp)Traktorenlexikon, “Landini 7800 DT” | EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 664 and the 7800 (DT). |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 664 and the 7800 (DT). |
| Which pumps more oil for implements? | 45.4 L/min (12.0 gpm)Traktorenlexikon, “IHC 664” | 49.0 L/min (12.9 gpm)Traktorenlexikon, “Landini 7800 DT” | EvenEven on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which lifts more on the three-point hitch? | — | 3,560 kg (7,848 lb)Traktorenlexikon, “Landini 7800 DT” | No figureNo call on three-point lift: no figure on record for the 664. |
| Which is heavier, for traction? | 2,698 kg (5,948 lb)Traktorenlexikon, “IHC 664” | 3,705 kg (8,168 lb)Traktorenlexikon, “Landini 7800 DT” | Ahead (a fact, not an advantage)The Landini 7800 (DT) is 37% heavier (1,007 kg / 2,220 lb) than the International Harvester 664 (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | — | No figureNo call on maximum permissible mass: no figure on record for the 664 and the 7800 (DT). |
| Which has the wider choice of gears? | 5 to 10Traktorenlexikon, “IHC 664” | 32Traktorenlexikon, “Landini 7800 DT” | AheadThe Landini 7800 (DT) has 220% more forward gears (22 gears) than the International Harvester 664 (both forward gears, as stated by the source). |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 664 and the 7800 (DT). |
| Which is faster on the road? | 30 km/h (18.6 mph)Traktorenlexikon, “IHC 664” | 30 km/h (18.6 mph)Traktorenlexikon, “Landini 7800 DT” | EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “IHC 664” | 540/1000 rpmTraktorenlexikon, “Landini 7800 DT” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | — | independentTraktorenlexikon, “Landini 7800 DT” | No figureNo call on PTO independence: not stated for the 664. |
| Which drives on both axles? | 2WDTraktorenlexikon, “IHC 664” | 2WD / 4WDTraktorenlexikon, “Landini 7800 DT” | AheadThe Landini 7800 (DT) is available with four-wheel drive; the International Harvester 664 is two-wheel drive (as stated by the sources). |
| Which is newer, and what about parts? | 1972–1973 | 1987–2000 | Ahead (a fact, not an advantage)The Landini 7800 (DT) is newer: production began 15 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Landini 7800 (DT) is 37% heavier (1,007 kg / 2,220 lb) than the International Harvester 664 (both unladen weight, as stated by the source).
- The Landini 7800 (DT) has 220% more forward gears (22 gears) than the International Harvester 664 (both forward gears, as stated by the source).
- The Landini 7800 (DT) is available with four-wheel drive; the International Harvester 664 is two-wheel drive (as stated by the sources).
- The Landini 7800 (DT) is newer: production began 15 years later. We hold no parts-availability data, so there is no call on parts.
- Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
- Even on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources