10 material differences · fewer than 12

Tractor oneInternational Harvester 54881981–1985No measured PTO figureTractor twoMassey Ferguson MF 15051975–1977No measured PTO figure

Which should you choose?

We will not advise between these two machines, because the drive differs (Two-wheel or four-wheel drive; 4WD); they were not built in overlapping years (1981–1985; 1975–1977). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

10 material differences · 3 fields identical or within 5%, which is not counted as material

International Harvester 5488 and Massey Ferguson MF 1505, field by field
Field5488MF 1505Gap
Engine
Engine power, claimed claimed187.3 hp182.6 hp—
Engine declaredINTERNATIONAL HARVESTER DTI-466 BCaterpillar 3208-V8differs
Displacement declared7.64 L10.42 L+36% MF 1505
Maximum torque declared585 lb·ft · 793 N·m400 lb·ft · 542 N·m+46% 5488
Transmission
Top speed declared18.6 mph · 30 km/h18.6 mph · 30 km/h—
Clutch declared—Pedal operated dry Borg & Beck single disc clutch—
Hydraulics & hitch
Pump flow declared—25.0 gpm · 94.6 L/min—
Rear PTO speeds declared1000 rpm1000 rpm—
Weight & dimensions
Unladen weight declared17,240 lb · 7,820 kg20,723 lb · 9,400 kg+20% MF 1505
Maximum permissible mass declared—25,133 lb · 11,400 kg—
Wheelbase declared111.6 in · 2,835 mm120.1 in · 3,050 mm+8% MF 1505
Length declared196.6 in · 4,994 mm244.1 in · 6,200 mm+24% MF 1505
Width declared114.0 in · 2,896 mm98.4 in · 2,500 mm+16% 5488
Height, over the cab declared116.0 in · 2,946 mm131.1 in · 3,330 mm+13% MF 1505
Ground clearance declared18.3 in · 465 mm15.0 in · 380 mm+22% 5488
Turning radius, braked declared12.6 ft · 3.84 m——
Fuel tank declared348.0 qt · 329.3 L479.7 qt · 454 L+38% MF 1505

International Harvester 5488 sources

Source
  • Source: Traktorenlexikon, “IHC 5488”

Massey Ferguson MF 1505 sources

Source
  • Source: Traktorenlexikon, “Massey Ferguson MF 1505”