International Harvester 5488 vs John Deere 4840
7 material differences · fewer than 12
Which should you choose?
Read our verdict on the 5488 and the 4840 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 5488 | 4840 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 187.3 hp | 178.6 hp | — |
| Engine declared | INTERNATIONAL HARVESTER DTI-466 B | John Deere 6.466 AT | differs |
| Displacement declared | 7.64 L | 7.64 L | — |
| Maximum torque declared | 585 lb·ft · 793 N·m | — | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | — | Hydraulically operated oil-cooled double-plate clutch | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Closed centre | — |
| Pump flow declared | — | 23.0 gpm · 87.1 L/min | — |
| Pressure declared | — | 3,481 psi · 240 bar | — |
| Three-point lift at ends declared | — | 8,294 lb · 3,762 kg | — |
| Rear PTO speeds declared | 1000 rpm | 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 17,240 lb · 7,820 kg | 14,899 lb · 6,758 kg | +16% 5488 |
| Wheelbase declared | 111.6 in · 2,835 mm | 118.5 in · 3,010 mm | +6% 4840 |
| Length declared | 196.6 in · 4,994 mm | 176.8 in · 4,490 mm | +11% 5488 |
| Width declared | 114.0 in · 2,896 mm | 95.7 in · 2,430 mm | +19% 5488 |
| Height declared | 116.0 in · 2,946 mm | 116.9 in · 2,970 mm | — |
| Ground clearance declared | 18.3 in · 465 mm | — | — |
| Turning radius, braked declared | 12.6 ft · 3.84 m | 13.5 ft · 4.10 m | +7% 4840 |
| Fuel tank declared | 348.0 qt · 329.3 L | 412.0 qt · 389.9 L | +18% 4840 |
International Harvester 5488 sources
Source
- Source: Traktorenlexikon, “IHC 5488”
John Deere 4840 sources
Source
- Source: Traktorenlexikon, “John Deere 4840”