International Harvester 5488 or J.I. Case 2470?

Which should you choose?

On performance, no comparable figure differs by more than its threshold: on this data the machines are level. On features, the International Harvester 5488 is ahead on forward gears and top speed.

  • The International Harvester 5488 suits road haulage better on this data: 20% (5.0 km/h / 3.1 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for International Harvester 5488 and J.I. Case 2470, with the call on each
Question54882470Call
Which puts more power through the PTO shaft?139.6 kW (187.2 hp)Traktorenlexikon, “IHC 5488”129.9 kW (174.2 hp)Traktorenlexikon, “Case 2470 Traction King”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the 5488 and the 2470.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the 5488 and the 2470.
Which pumps more oil for implements?—64.3 L/min (17.0 gpm)Traktorenlexikon, “Case 2470 Traction King”No figureNo call on hydraulic flow: no figure on record for the 5488.
Which lifts more on the three-point hitch?——No figureNo call on three-point lift: no figure on record for the 5488 and the 2470.
Which is heavier, for traction?7,820 kg (17,240 lb)Traktorenlexikon, “IHC 5488”9,292 kg (20,485 lb)Traktorenlexikon, “Case 2470 Traction King”Ahead (a fact, not an advantage)The J.I. Case 2470 is 19% heavier (1,472 kg / 3,245 lb) than the International Harvester 5488 (both unladen weight, as stated by the source).
Which may carry more ballast and load?——No figureNo call on maximum permissible mass: no figure on record for the 5488 and the 2470.
Which has the wider choice of gears?18Traktorenlexikon, “IHC 5488”12Traktorenlexikon, “Case 2470 Traction King”AheadThe International Harvester 5488 has 50% more forward gears (6 gears) than the J.I. Case 2470 (both forward gears, as stated by the source).
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the 5488 and the 2470.
Which is faster on the road?30 km/h (18.6 mph)Traktorenlexikon, “IHC 5488”25 km/h (15.5 mph)Traktorenlexikon, “Case 2470 Traction King”AheadThe International Harvester 5488 has 20% more top speed (5.0 km/h / 3.1 mph) than the J.I. Case 2470 (both top speed forward, as stated by the source).
Which offers more PTO speeds?1000 rpmTraktorenlexikon, “IHC 5488”1000 rpmTraktorenlexikon, “Case 2470 Traction King”EvenEven on PTO speeds: the same speeds (1000 rpm).
Which PTO runs independently of the ground drive?—independentTraktorenlexikon, “Case 2470 Traction King”No figureNo call on PTO independence: not stated for the 5488.
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “IHC 5488”4WDTraktorenlexikon, “Case 2470 Traction King”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1981–19851971–1978Ahead (a fact, not an advantage)The International Harvester 5488 is newer: production began 10 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The J.I. Case 2470 is 19% heavier (1,472 kg / 3,245 lb) than the International Harvester 5488 (both unladen weight, as stated by the source).
  • The International Harvester 5488 has 50% more forward gears (6 gears) than the J.I. Case 2470 (both forward gears, as stated by the source).
  • The International Harvester 5488 has 20% more top speed (5.0 km/h / 3.1 mph) than the J.I. Case 2470 (both top speed forward, as stated by the source).
  • The International Harvester 5488 is newer: production began 10 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on PTO speeds: the same speeds (1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, three-point lift, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources