10 material differences · fewer than 12
Tractor oneInternational Harvester 4541970–1973No measured PTO figureTractor twoLandini R-5500 (DT) "TL 22 N/A"1973–1983No measured PTO figure
Which should you choose?
Read our verdict on the 454 and the R-5500 (DT) "TL 22 N/A" → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 454 | R-5500 (DT) "TL 22 N/A" | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 49.3 hp | 49.3 hp | — |
| Engine declared | INTERNATIONAL-HARVESTER D-179 | Perkins AD 3.152 S | differs |
| Displacement declared | 2.93 L | 2.50 L | +17% 454 |
| Maximum torque declared | 131 lb·ft · 178 N·m | 128 lb·ft · 173 N·m | — |
| Transmission | |||
| Top speed declared | 19.9 mph · 32 km/h | 15.5 mph · 25 km/h | +28% 454 |
| Hydraulics & hitch | |||
| Pump flow declared | 11.4–12.6 gpm · 43.1–47.7 L/min | 7.6 gpm · 28.6 L/min | differs |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 4,720 lb · 2,141 kg | 4,431 lb · 2,010 kg | +7% 454 |
| Wheelbase declared | 75.2 in · 1,910 mm | 81.9 in · 2,080 mm | +9% R-5500 (DT) "TL 22 N/A" |
| Length declared | 133.0 in · 3,378 mm | 138.6 in · 3,520 mm | — |
| Width declared | 66.0 in · 1,676 mm | 69.3–89.0 in · 1,760–2,260 mm | differs |
| Ground clearance declared | 10.0 in · 254 mm | 16.5 in · 420 mm | +65% R-5500 (DT) "TL 22 N/A" |
| Turning radius, braked declared | 9.2 ft · 2.79 m | 10.9 ft · 3.31 m | +19% R-5500 (DT) "TL 22 N/A" |
| Fuel tank declared | 74.0 qt · 70.0 L | 64.5 qt · 61.0 L | +15% 454 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
International Harvester 454 sources
- Source: Traktorenlexikon, “IHC 454 (USA)”
- Source: Traktorenlexikon, “McCormick 523”
Landini R-5500 (DT) "TL 22 N/A" sources
- Source: Traktorenlexikon, “Landini 5500”
- Source: Traktorenlexikon, “Massey Ferguson MF 255”