6 material differences · fewer than 12

Tractor oneInternational Harvester 4441972–1977No measured PTO figureTractor twoJ.I. Case 310-B1958–1959No measured PTO figure

Which should you choose?

Read our verdict on the 444 and the 310-B → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

6 material differences · 2 fields identical or within 5%, which is not counted as material

International Harvester 444 and J.I. Case 310-B, field by field
Field444310-BGap
Engine
Engine power, claimed claimed41.4 hp36.5 hp+14% 444
Engine declaredINTERNATIONAL HARVESTER BD-154 A——
Displacement declared2.52 L——
Maximum torque declared116 lb·ft · 157 N·m——
Transmission
Top speed declared15.5 mph · 25 km/h15.5 mph · 25 km/h—
Clutch declared—Pedal-operated single-plate clutch—
Hydraulics & hitch
Pump flow declared7.2 gpm · 27.3 L/min3.0 gpm · 11.4 L/min+139% 444
Rear PTO speeds declared540 rpm540 rpm—
Weight & dimensions
Unladen weight declared4,129 lb · 1,873 kg2,917 lb · 1,323 kg+42% 444
Wheelbase declared70.0 in · 1,778 mm75.2 in · 1,911 mm+7% 310-B
Length declared121.0 in · 3,073 mm130.7 in · 3,321 mm+8% 310-B
Width declared65.0 in · 1,651 mm61.7 in · 1,567 mm+5% 444
Ground clearance declared17.0 in · 432 mm——
Turning radius, braked declared8.2 ft · 2.49 m——
Fuel tank declared56.0 qt · 53.0 L52.0 qt · 49.2 L+8% 444

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

International Harvester 444 sources

Source
  • Source: Traktorenlexikon, “IHC 444”

J.I. Case 310-B sources

Source
  • Source: Traktorenlexikon, “Case 310-B”