International Harvester 4156 vs Steyr 8170 a
9 material differences · fewer than 12
Which should you choose?
Read our verdict on the 4156 and the 8170 a → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 4156 | 8170 a | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 138 hp | 148.0 hp | +7% 8170 a |
| Engine declared | INTERNATIONAL HARVESTER DT-429 | Steyr WD 612.89 | differs |
| Displacement declared | 7.04 L | 6.60 L | +7% 4156 |
| Maximum torque declared | — | 451 lb·ft · 612 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 15.5–18.6 mph · 25–30 km/h | differs |
| Clutch declared | Pedal operated dry single plate clutch type 14 inches | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 16.5 gpm · 62.5 L/min | 11.1 gpm · 42.0 L/min | +49% 4156 |
| Pressure declared | — | 3,553 psi · 245 bar | — |
| Rear PTO speeds declared | 1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 15,174 lb · 6,883 kg | 13,281 lb · 6,024 kg | +14% 4156 |
| Maximum permissible mass declared | — | 17,637 lb · 8,000 kg | — |
| Wheelbase declared | 102.0 in · 2,590 mm | 106.3 in · 2,700 mm | — |
| Length declared | 194.0 in · 4,928 mm | 196.1 in · 4,980 mm | — |
| Width declared | 95.7 in · 2,430 mm | 92.1 in · 2,340 mm | — |
| Height declared | 139.8 in · 3,550 mm | 108.3 in · 2,750 mm | +29% 4156 |
| Ground clearance declared | 17.3 in · 440 mm | 18.9 in · 480 mm | +9% 8170 a |
| Turning radius, braked declared | — | 16.2 ft · 4.95 m | — |
| Fuel tank declared | 400.0 qt · 378.5 L | 253.6 qt · 240.0 L | +58% 4156 |
International Harvester 4156 sources
Source
- Source: Traktorenlexikon, “IHC 4156”
- Source: Traktorenlexikon, “IHC 4100”
Steyr 8170 a sources
Source
- Source: Traktorenlexikon, “Steyr 8170”