12 material differences
Tractor oneInternational Harvester 32881981–1985No measured PTO figureTractor twoSOMECA 1000 Super (TD)1976–1979No measured PTO figure
Which should you choose?
Read our verdict on the 3288 and the 1000 Super (TD) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
12 material differences · 1 fields identical or within 5%, which is not counted as material
| Field | 3288 | 1000 Super (TD) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 89.7 hp | 108.5 hp | +21% 1000 Super (TD) |
| Engine declared | INTERNATIONAL HARVESTER D-358 | FIAT-IVECO 8065.04.207 | differs |
| Displacement declared | 5.87 L | 5.50 L | +7% 3288 |
| Maximum torque declared | — | 268 lb·ft · 364 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 15.5 mph · 25 km/h | +20% 3288 |
| Clutch declared | Pedal operated ceramic clutch | Pedal-operated two-stage dry FERODO double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 15.0 gpm · 56.8 L/min | 10.4 gpm · 39.5 L/min | +44% 3288 |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 11,759 lb · 5,334 kg | 7,981 lb · 3,620 kg | +47% 3288 |
| Wheelbase declared | 104.8 in · 2,662 mm | 98.0 in · 2,490 mm | +7% 3288 |
| Length declared | 184.0 in · 4,674 mm | 150.0 in · 3,810 mm | +23% 3288 |
| Width declared | 102.0 in · 2,591 mm | 76.0 in · 1,930 mm | +34% 3288 |
| Ground clearance declared | 13.0 in · 330 mm | 22.8 in · 580 mm | +76% 1000 Super (TD) |
| Turning radius, braked declared | 11.9 ft · 3.63 m | 13.1 ft · 4.00 m | +10% 1000 Super (TD) |
| Fuel tank declared | 200.0 qt · 189.3 L | 124.7 qt · 118.0 L | +60% 3288 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
International Harvester 3288 sources
Source
- Source: Traktorenlexikon, “IHC 3288”
- Source: Traktorenlexikon, “IHC 786”
SOMECA 1000 Super (TD) sources
Source
- Source: Traktorenlexikon, “Someca 1000 S”