International Harvester 3288 vs John Deere 3350 (A)

9 material differences · fewer than 12

Tractor one

1981–1985

No measured PTO figure

Tractor two

1986–1993

No measured PTO figure

Which should you choose?

Read our verdict on the 3288 and the 3350 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 5 fields identical or within 5%, which is not counted as material

International Harvester 3288 and John Deere 3350 (A), field by field
Field	3288	3350 (A)	Gap
Engine
Engine power, claimed claimed	89.7 hp	98.7 hp	+10% 3350 (A)
Engine declared	INTERNATIONAL HARVESTER D-358	John Deere 6.359 DL-009	differs
Displacement declared	5.87 L	5.88 L	—
Maximum torque declared	—	292 lb·ft · 396 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal operated ceramic clutch	Pedal-operated dry LuK single-plate clutch as drive clutch	differs
Hydraulics & hitch
Pump flow declared	15.0 gpm · 56.8 L/min	13.8 gpm · 52.3 L/min	+9% 3288
Pressure declared	—	3,336 psi · 230 bar	—
Three-point lift at ends declared	6,704 lb · 3,041 kg	8,498 lb · 3,855 kg	+27% 3350 (A)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	11,759 lb · 5,334 kg	9,315 lb · 4,225 kg	+26% 3288
Maximum permissible mass declared	—	14,771 lb · 6,700 kg	—
Wheelbase declared	104.8 in · 2,662 mm	100.4 in · 2,551 mm	—
Length declared	184.0 in · 4,674 mm	175.8 in · 4,465 mm	—
Width declared	102.0 in · 2,591 mm	88.5 in · 2,249 mm	+15% 3288
Height declared	112.0 in · 2,845 mm	111.4 in · 2,830 mm	—
Ground clearance declared	13.0 in · 330 mm	25.6 in · 650 mm	+97% 3350 (A)
Turning radius, braked declared	11.9 ft · 3.63 m	—	—
Fuel tank declared	200.0 qt · 189.3 L	127.9–182.8 qt · 121.0–173.0 L	differs

Source

Source