International Harvester 1586 vs International Harvester 4166
6 material differences · fewer than 12
Which should you choose?
Read our verdict on the 1586 and the 4166 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | 1586 | 4166 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 161 hp | 150.9 hp | +7% 1586 |
| Engine declared | INTERNATIONAL HARVESTER DT-436 | INTERNATIONAL HARVESTER DT-436 | — |
| Displacement declared | 7.14 L | 7.14 L | — |
| Maximum torque declared | 456 lb·ft · 618 N·m | — | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | — | Pedal operated dry single plate clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 12.0 gpm · 45.4 L/min | 16.5 gpm · 62.5 L/min | +38% 4166 |
| Three-point lift at ends declared | 7,077 lb · 3,210 kg | — | — |
| Rear PTO speeds declared | 1000 rpm | 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 15,119 lb · 6,858 kg | 16,325 lb · 7,405 kg | +8% 4166 |
| Wheelbase declared | 104.8 in · 2,662 mm | 102.0 in · 2,591 mm | — |
| Length declared | 169.0 in · 4,293 mm | 194.0 in · 4,928 mm | +15% 4166 |
| Width declared | 102.0 in · 2,591 mm | 103.0 in · 2,616 mm | — |
| Height declared | 116.0 in · 2,946 mm | 138.0 in · 3,505 mm | +19% 4166 |
| Ground clearance declared | 14.0 in · 356 mm | 17.0 in · 432 mm | +21% 4166 |
| Turning radius, braked declared | 11.2 ft · 3.40 m | — | — |
| Fuel tank declared | 252.0 qt · 238.5 L | 400.0 qt · 378.5 L | +59% 4166 |
International Harvester 1586 sources
Source
- Source: Traktorenlexikon, “IHC 1586”
- Source: Traktorenlexikon, “IHC 1466”
International Harvester 4166 sources
Source
- Source: Traktorenlexikon, “IHC 4166”
- Source: Traktorenlexikon, “IHC 1466”