International Harvester 1486 vs J.I. Case 1370
9 material differences · fewer than 12
Which should you choose?
Read our verdict on the 1486 and the 1370 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | 1486 | 1370 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 143.0 hp | 143.0 hp | — |
| Engine declared | INTERNATIONAL HARVESTER DT-436 | CASE A-504 BDT | differs |
| Displacement declared | 7.14 L | 8.26 L | +16% 1370 |
| Maximum torque declared | 406 lb·ft · 550 N·m | 515 lb·ft · 698 N·m | +27% 1370 |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | — | Pedal-operated wet multi-disc clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 12.0 gpm · 45.4 L/min | 20.0 gpm · 75.7 L/min | +67% 1370 |
| Three-point lift at ends declared | — | 12,125 lb · 5,500 kg | — |
| Rear PTO speeds declared | 1000 rpm | 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 14,617 lb · 6,630 kg | 15,289 lb · 6,935 kg | — |
| Wheelbase declared | 104.8 in · 2,662 mm | 104.0 in · 2,642 mm | — |
| Length declared | 168.0 in · 4,267 mm | 182.0 in · 4,623 mm | +8% 1370 |
| Width declared | 102.0 in · 2,591 mm | 96.0 in · 2,438 mm | +6% 1486 |
| Height declared | 115.0 in · 2,921 mm | 116.0 in · 2,946 mm | — |
| Ground clearance declared | 14.0 in · 356 mm | 16.0 in · 406 mm | +14% 1370 |
| Turning radius, braked declared | 11.6 ft · 3.53 m | 12.3 ft · 3.76 m | +7% 1370 |
| Fuel tank declared | 252.0 qt · 238.5 L | 320.0 qt · 302.8 L | +27% 1370 |
International Harvester 1486 sources
Source
- Source: Traktorenlexikon, “IHC 1486”
- Source: Traktorenlexikon, “IHC 1466”
J.I. Case 1370 sources
Source
- Source: Traktorenlexikon, “Case 1370”