International Harvester 1486 vs International Harvester 1568
5 material differences · fewer than 12
Which should you choose?
Read our verdict on the 1486 and the 1568 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
5 material differences · 8 fields identical or within 5%, which is not counted as material
| Field | 1486 | 1568 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 143.0 hp | 150.9 hp | +6% 1568 |
| Engine declared | INTERNATIONAL HARVESTER DT-436 | INTERNATIONAL HARVESTER DV-8/550 | differs |
| Displacement declared | 7.14 L | 8.99 L | +26% 1568 |
| Maximum torque declared | 406 lb·ft · 550 N·m | — | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Hydraulics & hitch | |||
| Pump flow declared | 12.0 gpm · 45.4 L/min | 12.0 gpm · 45.5 L/min | — |
| Three-point lift at ends declared | — | 5,798 lb · 2,630 kg | — |
| Rear PTO speeds declared | 1000 rpm | 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 14,617 lb · 6,630 kg | 15,194 lb · 6,892 kg | — |
| Wheelbase declared | 104.8 in · 2,662 mm | 104.8 in · 2,662 mm | — |
| Length declared | 168.0 in · 4,267 mm | 168.0 in · 4,267 mm | — |
| Width declared | 102.0 in · 2,591 mm | 98.0 in · 2,489 mm | — |
| Height declared | 115.0 in · 2,921 mm | 128.0 in · 3,251 mm | +11% 1568 |
| Ground clearance declared | 14.0 in · 356 mm | 17.0 in · 432 mm | +21% 1568 |
| Turning radius, braked declared | 11.6 ft · 3.53 m | 11.9 ft · 3.63 m | — |
| Fuel tank declared | 252.0 qt · 238.5 L | 168.0 qt · 159.0 L | +50% 1486 |
International Harvester 1486 sources
Source
- Source: Traktorenlexikon, “IHC 1486”
- Source: Traktorenlexikon, “IHC 1466”
International Harvester 1568 sources
Source
- Source: Traktorenlexikon, “IHC 1568”
- Source: Traktorenlexikon, “Farmall Farmall 1568”