7 material differences · fewer than 12
Tractor oneInternational Harvester 14561969–1971No measured PTO figureTractor twoOLIVER 26551971–1972No measured PTO figure
Which should you choose?
Read our verdict on the 1456 and the 2655 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | 1456 | 2655 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 132.2 hp | 141.1 hp | +7% 2655 |
| Engine declared | INTERNATIONAL HARVESTER DT-407 | — | — |
| Displacement declared | 6.67 L | — | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 23.6 mph · 38 km/h | +27% 2655 |
| Clutch declared | Pedal operated dry single plate clutch | Foot-operated dry single-plate clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Open centre | — |
| Pump flow declared | — | 17.0 gpm · 64.3 L/min | — |
| Rear PTO speeds declared | 1000 rpm | 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 12,800 lb · 5,806 kg | 19,850 lb · 9,004 kg | +55% 2655 |
| Wheelbase declared | 104.8 in · 2,662 mm | 120.0 in · 3,048 mm | +15% 2655 |
| Length declared | 164.0 in · 4,166 mm | 234.0 in · 5,944 mm | +43% 2655 |
| Width declared | 92.0 in · 2,337 mm | 96.0 in · 2,438 mm | — |
| Height, over the steering wheel declared | 86.0 in · 2,184 mm | 99.0 in · 2,515 mm | +15% 2655 |
| Ground clearance declared | 23.5 in · 597 mm | — | — |
| Turning radius, braked declared | 11.7 ft · 3.56 m | — | — |
| Fuel tank declared | 168.0 qt · 159.0 L | 400.0 qt · 378.5 L | +138% 2655 |
International Harvester 1456 sources
Source
- Source: Traktorenlexikon, “IHC 1456”
- Source: Traktorenlexikon, “IHC 1026”
OLIVER 2655 sources
Source
- Source: Traktorenlexikon, “Oliver 2655”