10 material differences · fewer than 12
Tractor oneInternational Harvester 1455 XL1981–1996No measured PTO figureTractor twoSAME Laser 150 DT1983–1996No measured PTO figure
Which should you choose?
Read our verdict on the 1455 XL and the Laser 150 DT → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 1455 XL | Laser 150 DT | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 143 hp | 143.0 hp | — |
| Engine declared | IH DT-402 | SAME 1056 PS | differs |
| Displacement declared | 6.59 L | 6.23 L | +6% 1455 XL |
| Maximum torque declared | 390 lb·ft · 529 N·m | 360 lb·ft · 488 N·m | +8% 1455 XL |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6 mph · 30 km/h | differs |
| Clutch declared | Dry dual clutch with additional Voith fluid coupling | pedal-operated dry single-plate clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Hydraulic control declared | — | Load sensing | — |
| Pump flow declared | 13.2 gpm · 50.0 L/min | — | — |
| Pressure declared | — | 3,046 psi · 210 bar | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 14,154 lb · 6,420 kg | 12,324–12,721 lb · 5,590–5,770 kg | differs |
| Maximum permissible mass declared | — | 18,739 lb · 8,500 kg | — |
| Wheelbase declared | 110.2 in · 2,798 mm | 112.4 in · 2,856 mm | — |
| Length declared | 186.6 in · 4,740 mm | 177.6 in · 4,510 mm | — |
| Width declared | 95.0 in · 2,412 mm | 84.6–104.3 in · 2,150–2,650 mm | differs |
| Ground clearance declared | 19.6 in · 499 mm | 20.9 in · 530 mm | +6% Laser 150 DT |
| Turning radius, braked declared | 17.7 ft · 5.40 m | 16.1 ft · 4.91 m | +10% 1455 XL |
| Fuel tank declared | 211.3 qt · 200 L | 243.0 qt · 230.0 L | +15% Laser 150 DT |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
International Harvester 1455 XL sources
- Source: Traktorenlexikon, “IHC 1455XL”
SAME Laser 150 DT sources
- Source: Traktorenlexikon, “SAME Laser 150”