10 material differences · fewer than 12

Tractor oneInternational Harvester 1455 XL1981–1996No measured PTO figureTractor twoMassey Ferguson MF 8120 A1995–1999No measured PTO figure

Which should you choose?

We will not advise between these two machines, because the drive differs (4WD; Two-wheel or four-wheel drive). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

10 material differences · 4 fields identical or within 5%, which is not counted as material

International Harvester 1455 XL and Massey Ferguson MF 8120 A, field by field
Field1455 XLMF 8120 AGap
Engine
Engine power, claimed claimed143 hp143.1 hp—
Engine declaredIH DT-402Perkins 1006.60 THR 3differs
Displacement declared6.59 L5.99 L+10% 1455 XL
Maximum torque declared390 lb·ft · 529 N·m406 lb·ft · 550 N·m—
Transmission
Top speed declared18.6–24.9 mph · 30–40 km/h24.9 mph · 40 km/hdiffers
Clutch declaredDry dual clutch with additional Voith fluid couplingPedal-operated dry Valeo double clutchdiffers
Hydraulics & hitch
Hydraulic centre declaredOpen centre——
Pump flow declared13.2 gpm · 50.0 L/min14.1 gpm · 53.3 L/min+7% MF 8120 A
Pressure declared—2,901 psi · 200 bar—
Rear PTO speeds declared540/1000 rpm540/540E/1000 rpmdiffers
Weight & dimensions
Unladen weight declared14,154 lb · 6,420 kg12,434 lb · 5,640 kg+14% 1455 XL
Maximum permissible mass declared—25,353 lb · 11,500 kg—
Wheelbase declared110.2 in · 2,798 mm109.3 in · 2,777 mm—
Length declared186.6 in · 4,740 mm199.7 in · 5,073 mm+7% MF 8120 A
Width declared95.0 in · 2,412 mm90.8–98.0 in · 2,306–2,488 mm—
Ground clearance declared19.6 in · 499 mm17.4 in · 442 mm+13% 1455 XL
Turning radius, braked declared17.7 ft · 5.40 m——
Fuel tank declared211.3 qt · 200 L238.8 qt · 226.0 L+13% MF 8120 A

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

International Harvester 1455 XL sources

Source
  • Source: Traktorenlexikon, “IHC 1455XL”

Massey Ferguson MF 8120 A sources

Source
  • Source: Traktorenlexikon, “Massey Ferguson MF 8120”