International Harvester 1246 or International Harvester 3688?
Which should you choose?
On performance, every comparable figure that differs favours the International Harvester 3688: hydraulic flow. It is also ahead on forward gears and PTO speeds.
- The International Harvester 3688 suits PTO-driven implements (mowers, balers, pumps) better on this data: offers 540 rpm.
- The International Harvester 3688 suits loader and hydraulic implement work better on this data: 70% (28.1 L/min / 7.4 gpm) more hydraulic flow.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 1246 | 3688 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 85.0 kW (113.9 hp)Traktorenlexikon, “IHC 1246” | 83.8 kW (112.4 hp)Traktorenlexikon, “IHC 3688” | EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 1246 and the 3688. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 1246 and the 3688. |
| Which pumps more oil for implements? | 40.0 L/min (10.6 gpm)Traktorenlexikon, “IHC 1246” | 68.1 L/min (18.0 gpm)Traktorenlexikon, “IHC 3688” | AheadThe International Harvester 3688 has 70% more hydraulic flow (28.1 L/min / 7.4 gpm) than the International Harvester 1246 (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 3,700 kg (8,157 lb)Traktorenlexikon, “IHC 1246” | — | No figureNo call on three-point lift: no figure on record for the 3688. |
| Which is heavier, for traction? | 4,450 kg (9,811 lb)Traktorenlexikon, “IHC 1246” | 5,988 kg (13,201 lb)Traktorenlexikon, “IHC 3688” | Ahead (a fact, not an advantage)The International Harvester 3688 is 35% heavier (1,538 kg / 3,391 lb) than the International Harvester 1246 (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | — | No figureNo call on maximum permissible mass: no figure on record for the 1246 and the 3688. |
| Which has the wider choice of gears? | 12Traktorenlexikon, “IHC 1246” | 16Traktorenlexikon, “IHC 3688” | AheadThe International Harvester 3688 has 33% more forward gears (4 gears) than the International Harvester 1246 (both forward gears, as stated by the source). |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 1246 and the 3688. |
| Which is faster on the road? | 32 km/h (19.9 mph)Traktorenlexikon, “IHC 1246” | 32 km/h (19.9 mph)Traktorenlexikon, “IHC 3688” | EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which offers more PTO speeds? | 1000 rpmTraktorenlexikon, “IHC 1246” | 540/1000 rpmTraktorenlexikon, “IHC 3688” | AheadThe International Harvester 3688 offers 540 rpm at the PTO, which the International Harvester 1246 does not (as stated by the sources). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “IHC 1246” | — | No figureNo call on PTO independence: not stated for the 3688. |
| Which drives on both axles? | 2WD / 4WDTraktorenlexikon, “IHC 1246” | Two-wheel or four-wheel driveTraktorenlexikon, “IHC 3688” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1972–1979 | 1981–1985 | Ahead (a fact, not an advantage)The International Harvester 3688 is newer: production began 9 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The International Harvester 3688 has 70% more hydraulic flow (28.1 L/min / 7.4 gpm) than the International Harvester 1246 (both pump flow, as stated by the source).
- The International Harvester 3688 is 35% heavier (1,538 kg / 3,391 lb) than the International Harvester 1246 (both unladen weight, as stated by the source).
- The International Harvester 3688 has 33% more forward gears (4 gears) than the International Harvester 1246 (both forward gears, as stated by the source).
- The International Harvester 3688 offers 540 rpm at the PTO, which the International Harvester 1246 does not (as stated by the sources).
- The International Harvester 3688 is newer: production began 9 years later. We hold no parts-availability data, so there is no call on parts.
- Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
- Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on drive: every machine is available with four-wheel drive.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources