7 material differences · fewer than 12
Tractor oneInternational Harvester Hydro 841977–1981No measured PTO figureTractor twoMassey Ferguson MF 275 (A)1975–1983No measured PTO figure
Which should you choose?
Read our verdict on the Hydro 84 and the MF 275 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 7 fields identical or within 5%, which is not counted as material
| Field | Hydro 84 | MF 275 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 75.9 hp | 65.2 hp | +16% Hydro 84 |
| Engine declared | INTERNATIONAL-HARVESTER D-246 | Perkins A 4.236 UA | differs |
| Displacement declared | 4.03 L | 3.86 L | — |
| Maximum torque declared | 160 lb·ft · 217 N·m | 198 lb·ft · 268.8 N·m | +24% MF 275 (A) |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 15.5 mph · 25 km/h | +20% Hydro 84 |
| Clutch declared | — | pedal-operated dry and air-cooled single clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 8.9 gpm · 33.7 L/min | 7.0 gpm · 26.5 L/min | +27% Hydro 84 |
| Pressure declared | 2,698 psi · 186 bar | — | — |
| Three-point lift, at the coupling points declared | 4,449 lb · 2,018 kg | 4,630 lb · 2,100 kg | — |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,375 lb · 2,438 kg | 6,283 lb · 2,850 kg | +17% MF 275 (A) |
| Wheelbase declared | 88.0 in · 2,235 mm | 88.5 in · 2,248 mm | — |
| Length declared | 144.9 in · 3,680 mm | 149.0 in · 3,785 mm | — |
| Width declared | 70.1 in · 1,780 mm | 73.2 in · 1,860 mm | — |
| Ground clearance declared | 14.0 in · 356 mm | 16.1 in · 410 mm | +15% MF 275 (A) |
| Turning radius, braked declared | 11.7 ft · 3.58 m | 12.3 ft · 3.76 m | — |
| Fuel tank declared | 81.4 qt · 77.0 L | 84.5 qt · 80 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
International Harvester Hydro 84 sources
- Source: Traktorenlexikon, “IHC Hydro-84”
- Source: Traktorenlexikon, “IHC 784”
Massey Ferguson MF 275 (A) sources
- Source: Traktorenlexikon, “Massey Ferguson MF 275”