International Harvester Farmall M/MV vs International Harvester W-6
6 material differences · fewer than 12
Which should you choose?
Read our verdict on the Farmall M/MV and the W-6 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | Farmall M/MV | W-6 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 36.5 hp | 36.5 hp | — |
| Engine declared | INTERNATIONAL HARVESTER C-248 | INTERNATIONAL HARVESTER C-248 | — |
| Displacement declared | 4.06 L | 4.06 L | — |
| Transmission | |||
| Top speed declared | 16.2 mph · 26 km/h | 14.3 mph · 23 km/h | +13% Farmall M/MV |
| Clutch declared | Pedal-operated dry Rockford single-plate clutch type 11 inches | Pedal operated dry Rockford single plate clutch type 11 inch | differs |
| Hydraulics & hitch | |||
| Rear PTO speeds declared | 537 rpm | 537 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 4,910 lb · 2,227 kg | 4,830 lb · 2,191 kg | — |
| Wheelbase declared | 88.7 in · 2,254 mm | 76.0 in · 1,930 mm | +17% Farmall M/MV |
| Length declared | 133.1 in · 3,381 mm | 124.4 in · 3,159 mm | +7% Farmall M/MV |
| Width declared | 84.5 in · 2,146 mm | 63.0 in · 1,600 mm | +34% Farmall M/MV |
| Height declared | 78.3 in · 1,988 mm | 90.7 in · 2,305 mm | +16% W-6 |
| Ground clearance declared | 25.5 in · 648 mm | — | — |
| Turning radius, braked declared | 6.8 ft · 2.08 m | — | — |
| Fuel tank declared | 84.0 qt · 79.5 L | 84.0 qt · 79.5 L | — |
International Harvester Farmall M/MV sources
Source
- Source: Traktorenlexikon, “IHC Farmall-M”
- Source: Traktorenlexikon, “McCormick Farmall-M”
- Source: Traktorenlexikon, “Farmall Farmall-M”
International Harvester W-6 sources
Source
- Source: Traktorenlexikon, “McCormick W-6”
- Source: Traktorenlexikon, “McCormick Farmall-M”