7 material differences · fewer than 12
Tractor oneInternational Harvester Farmall 856 (A)1967–1971No measured PTO figureTractor twoMercedes-Benz MB trac 11001976–1986No measured PTO figure
Which should you choose?
Read our verdict on the Farmall 856 (A) and the MB trac 1100 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | Farmall 856 (A) | MB trac 1100 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 101 hp | 109 hp | +8% MB trac 1100 |
| Engine declared | INTERNATIONAL HARVESTER C-301 | Daimler-Benz OM 352 | differs |
| Displacement declared | — | 5.68 L | — |
| Maximum torque declared | 326 lb·ft · 442 N·m | 268 lb·ft · 363 N·m | +22% Farmall 856 (A) |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 15.5–24.9 mph · 25–40 km/h | differs |
| Clutch declared | — | dry double clutch | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Open centre | — |
| Pump flow declared | 12.0 gpm · 45.5 L/min | 11.7 gpm · 44.3 L/min | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 8,501 lb · 3,856 kg | 12,214–13,228 lb · 5,540–6,000 kg | differs |
| Wheelbase declared | 101.0 in · 2,565 mm | 104.3 in · 2,650 mm | — |
| Length declared | 167.0 in · 4,242 mm | 184.3 in · 4,680 mm | +10% MB trac 1100 |
| Width declared | 92.0 in · 2,337 mm | 98.4 in · 2,500 mm | +7% MB trac 1100 |
| Ground clearance declared | 22.0 in · 559 mm | 22.4 in · 570 mm | — |
| Turning radius, braked declared | 9.5 ft · 2.90 m | — | — |
| Fuel tank declared | 168.0 qt · 159.0 L | 179.6 qt · 170 L | +7% MB trac 1100 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
International Harvester Farmall 856 (A) sources
- Source: Traktorenlexikon, “Farmall Farmall 856”
- Source: Traktorenlexikon, “IHC 806”
Mercedes-Benz MB trac 1100 sources
- Source: Traktorenlexikon, “Mercedes-Benz MB trac 1100”