8 material differences · fewer than 12
Tractor oneInternational Harvester Farmall 8061963–1967No measured PTO figureTractor twoLeyland 21001972–1980No measured PTO figure
Which should you choose?
Read our verdict on the Farmall 806 and the 2100 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | Farmall 806 | 2100 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 93.7 hp | 100.0 hp | +7% 2100 |
| Engine declared | INTERNATIONAL HARVESTER C-301 | LEYLAND-MOTORS 6/98 NT | differs |
| Displacement declared | — | 5.66 L | — |
| Maximum torque declared | — | 276 lb·ft · 374 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | Pedal operated dry single plate clutch | Dry BORG & BECK double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | — | 11.0 gpm · 41.6 L/min | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 8,651 lb · 3,924 kg | 8,911 lb · 4,042 kg | — |
| Wheelbase declared | 101.2 in · 2,570 mm | 90.0 in · 2,286 mm | +12% Farmall 806 |
| Length declared | 161.0 in · 4,089 mm | 150.0 in · 3,810 mm | +7% Farmall 806 |
| Width declared | 110.0 in · 2,794 mm | 85.5 in · 2,172 mm | +29% Farmall 806 |
| Ground clearance declared | 21.4 in · 543 mm | 15.8 in · 402 mm | +35% Farmall 806 |
| Turning radius, braked declared | 9.4 ft · 2.87 m | 12.4 ft · 3.77 m | +31% 2100 |
| Fuel tank declared | 168.0 qt · 159.0 L | 72.1 qt · 68.2 L | +133% Farmall 806 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
International Harvester Farmall 806 sources
- Source: Traktorenlexikon, “Farmall Farmall 806”
- Source: Traktorenlexikon, “IHC 806”
Leyland 2100 sources
- Source: Traktorenlexikon, “Leyland 2100”