7 material differences · fewer than 12
Tractor oneInternational Harvester Farmall 8061963–1967No measured PTO figureTractor twoJ.I. Case 931 GP1959–1969No measured PTO figure
Which should you choose?
Read our verdict on the Farmall 806 and the 931 GP → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | Farmall 806 | 931 GP | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 93.7 hp | 83.0 hp | +13% Farmall 806 |
| Engine declared | INTERNATIONAL HARVESTER C-301 | — | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 15.5 mph · 25 km/h | +20% Farmall 806 |
| Clutch declared | Pedal operated dry single plate clutch | Pedal-operated dry CASE single-disc clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | — | 15.5 gpm · 58.7 L/min | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 8,651 lb · 3,924 kg | 8,915 lb · 4,044 kg | — |
| Wheelbase declared | 101.2 in · 2,570 mm | 108.0 in · 2,743 mm | +7% 931 GP |
| Length declared | 161.0 in · 4,089 mm | 162.0 in · 4,115 mm | — |
| Width declared | 110.0 in · 2,794 mm | 85.2 in · 2,165 mm | +29% Farmall 806 |
| Ground clearance declared | 21.4 in · 543 mm | 17.0 in · 432 mm | +26% Farmall 806 |
| Turning radius, braked declared | 9.4 ft · 2.87 m | 10.8 ft · 3.30 m | +15% 931 GP |
| Fuel tank declared | 168.0 qt · 159.0 L | 95.9–120.0 qt · 90.8–113.6 L | differs |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
International Harvester Farmall 806 sources
- Source: Traktorenlexikon, “Farmall Farmall 806”
- Source: Traktorenlexikon, “IHC 806”
J.I. Case 931 GP sources
- Source: Traktorenlexikon, “Case 931”