International Harvester Farmall 806 vs J.I. Case 930
8 material differences · fewer than 12
Which should you choose?
Read our verdict on the Farmall 806 and the 930 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | Farmall 806 | 930 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 93.7 hp | 83.0 hp | +13% Farmall 806 |
| Engine declared | INTERNATIONAL HARVESTER C-301 | — | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 15.5 mph · 25 km/h | +20% Farmall 806 |
| Clutch declared | Pedal operated dry single plate clutch | Pedal operated dry CASE single plate clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | — | 15.5 gpm · 58.7 L/min | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 8,651 lb · 3,924 kg | 8,752 lb · 3,970 kg | — |
| Wheelbase declared | 101.2 in · 2,570 mm | 83.8 in · 2,129 mm | +21% Farmall 806 |
| Length declared | 161.0 in · 4,089 mm | 141.0 in · 3,581 mm | +14% Farmall 806 |
| Width declared | 110.0 in · 2,794 mm | 84.0 in · 2,134 mm | +31% Farmall 806 |
| Height declared | 81.0 in · 2,057 mm | 64.3 in · 1,634 mm | +26% Farmall 806 |
| Ground clearance declared | 21.4 in · 543 mm | 17.5 in · 445 mm | +22% Farmall 806 |
| Turning radius, braked declared | 9.4 ft · 2.87 m | 9.5 ft · 2.90 m | — |
| Fuel tank declared | 168.0 qt · 159.0 L | 95.9–120.0 qt · 90.8–113.6 L | differs |
International Harvester Farmall 806 sources
Source
- Source: Traktorenlexikon, “Farmall Farmall 806”
- Source: Traktorenlexikon, “IHC 806”
J.I. Case 930 sources
Source
- Source: Traktorenlexikon, “Case 930”