International Harvester Farmall 766 vs International Harvester 885 (A)

9 material differences · fewer than 12

Tractor one

1971–1973

No measured PTO figure

Tractor two

1981–1990

No measured PTO figure

Which should you choose?

Read our verdict on the Farmall 766 and the 885 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 3 fields identical or within 5%, which is not counted as material

International Harvester Farmall 766 and International Harvester 885 (A), field by field
Field	Farmall 766	885 (A)	Gap
Engine
Engine power, claimed claimed	78.9 hp	78.9 hp	—
Engine declared	INTERNATIONAL HARVESTER C-291	INTERNATIONAL-HARVESTER DT-268	differs
Displacement declared	—	4.40 L	—
Maximum torque declared	—	201 lb·ft · 272 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	15.5 mph · 25 km/h	+20% Farmall 766
Clutch declared	—	Pedal-operated dry Laycock single-disc clutch	—
Hydraulics & hitch
Pump flow declared	12.0 gpm · 45.5 L/min	—	—
Pressure declared	—	2,698 psi · 186 bar	—
Three-point lift at ends declared	—	5,238 lb · 2,376 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	11,341 lb · 5,144 kg	7,363 lb · 3,340 kg	+54% Farmall 766
Wheelbase declared	102.7 in · 2,609 mm	88.2 in · 2,240 mm	+16% Farmall 766
Length declared	165.0 in · 4,191 mm	147.2 in · 3,740 mm	+12% Farmall 766
Width declared	98.0 in · 2,489 mm	75.6 in · 1,920 mm	+30% Farmall 766
Height declared	105.0 in · 2,667 mm	103.9 in · 2,640 mm	—
Ground clearance declared	14.0 in · 356 mm	12.2 in · 310 mm	+15% Farmall 766
Turning radius, braked declared	9.7 ft · 2.95 m	11.6 ft · 3.55 m	+20% 885 (A)
Fuel tank declared	147.9 qt · 140.0 L	118.3 qt · 112.0 L	+25% Farmall 766

Source

Source