International Harvester Farmall 706 or WHITE 1470?

Which should you choose?

On performance, every comparable figure that differs favours the International Harvester Farmall 706: hydraulic flow. It is also ahead on top speed and PTO speeds. On features, the WHITE 1470 is ahead on drive.

  • The International Harvester Farmall 706 suits PTO-driven implements (mowers, balers, pumps) better on this data: offers 1000 rpm.
  • The International Harvester Farmall 706 suits loader and hydraulic implement work better on this data: 65% (18.0 L/min / 4.8 gpm) more hydraulic flow.
  • The International Harvester Farmall 706 suits road haulage better on this data: 20% (5.0 km/h / 3.1 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for International Harvester Farmall 706 and WHITE 1470, with the call on each
QuestionFarmall 7061470Call
Which puts more power through the PTO shaft?51.3 kW (68.7 hp)Traktorenlexikon, “Farmall Farmall 706”51.5 kW (69.0 hp)Traktorenlexikon, “White 1470”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the Farmall 706 and the 1470.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the Farmall 706 and the 1470.
Which pumps more oil for implements?45.5 L/min (12.0 gpm)Traktorenlexikon, “Farmall Farmall 706”27.5 L/min (7.3 gpm)Traktorenlexikon, “White 1470”AheadThe International Harvester Farmall 706 has 65% more hydraulic flow (18.0 L/min / 4.8 gpm) than the WHITE 1470 (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?——No figureNo call on three-point lift: no figure on record for the Farmall 706 and the 1470.
Which is heavier, for traction?3,946 kg (8,699 lb)Traktorenlexikon, “Farmall Farmall 706”2,948 kg (6,499 lb)Traktorenlexikon, “White 1470”Ahead (a fact, not an advantage)The International Harvester Farmall 706 is 34% heavier (998 kg / 2,200 lb) than the WHITE 1470 (both unladen weight, as stated by the source).
Which may carry more ballast and load?——No figureNo call on maximum permissible mass: no figure on record for the Farmall 706 and the 1470.
Which has the wider choice of gears?8 to 16Traktorenlexikon, “Farmall Farmall 706”7Traktorenlexikon, “White 1470”EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the Farmall 706 and the 1470.
Which is faster on the road?30 km/h (18.6 mph)Traktorenlexikon, “Farmall Farmall 706”25 km/h (15.5 mph)Traktorenlexikon, “White 1470”AheadThe International Harvester Farmall 706 has 20% more top speed (5.0 km/h / 3.1 mph) than the WHITE 1470 (both top speed forward, as stated by the source).
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Farmall Farmall 706”540 rpmTraktorenlexikon, “White 1470”AheadThe International Harvester Farmall 706 offers 1000 rpm at the PTO, which the WHITE 1470 does not (as stated by the sources).
Which PTO runs independently of the ground drive?——No figureNo call on PTO independence: not stated for the Farmall 706 and the 1470.
Which drives on both axles?2WDTraktorenlexikon, “Farmall Farmall 706”Two-wheel or four-wheel driveTraktorenlexikon, “White 1470”AheadThe WHITE 1470 is available with four-wheel drive; the International Harvester Farmall 706 is two-wheel drive (as stated by the sources).
Which is newer, and what about parts?1963–19671973–1975Ahead (a fact, not an advantage)The WHITE 1470 is newer: production began 10 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The International Harvester Farmall 706 has 65% more hydraulic flow (18.0 L/min / 4.8 gpm) than the WHITE 1470 (both pump flow, as stated by the source).
  • The International Harvester Farmall 706 is 34% heavier (998 kg / 2,200 lb) than the WHITE 1470 (both unladen weight, as stated by the source).
  • The International Harvester Farmall 706 has 20% more top speed (5.0 km/h / 3.1 mph) than the WHITE 1470 (both top speed forward, as stated by the source).
  • The International Harvester Farmall 706 offers 1000 rpm at the PTO, which the WHITE 1470 does not (as stated by the sources).
  • The WHITE 1470 is available with four-wheel drive; the International Harvester Farmall 706 is two-wheel drive (as stated by the sources).
  • The WHITE 1470 is newer: production began 10 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources