9 material differences · fewer than 12
Tractor oneInternational Harvester Farmall 7061963–1967No measured PTO figureTractor twoOLIVER 14651973–1975No measured PTO figure
Which should you choose?
Read our verdict on the Farmall 706 and the 1465 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | Farmall 706 | 1465 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 66.1 hp | 75.9 hp | +15% 1465 |
| Engine declared | INTERNATIONAL HARVESTER C-263 or C-291 | OM C 03/70 | differs |
| Displacement declared | — | 4.56 L | — |
| Maximum torque declared | — | 206 lb·ft · 279 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 15.5 mph · 25 km/h | +20% Farmall 706 |
| Clutch declared | Pedal-operated dry single-plate clutch | Dry FERODO double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 12.0 gpm · 45.5 L/min | 6.2 gpm · 23.5 L/min | +94% Farmall 706 |
| Pressure declared | — | 2,901 psi · 200 bar | — |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 8,699 lb · 3,946 kg | 6,499 lb · 2,948 kg | +34% Farmall 706 |
| Wheelbase declared | 97.5 in · 2,477 mm | 92.8 in · 2,357 mm | — |
| Length declared | 157.0 in · 3,988 mm | 140.0 in · 3,556 mm | +12% Farmall 706 |
| Width declared | 92.0 in · 2,337 mm | 72.1 in · 1,831 mm | +28% Farmall 706 |
| Ground clearance declared | 21.0 in · 533 mm | 20.3 in · 516 mm | — |
| Turning radius, braked declared | 9.2 ft · 2.82 m | — | — |
| Fuel tank declared | 132.1 qt · 125.0 L | 83.5 qt · 79.0 L | +58% Farmall 706 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
International Harvester Farmall 706 sources
- Source: Traktorenlexikon, “Farmall Farmall 706”
- Source: Traktorenlexikon, “IHC 706”
OLIVER 1465 sources
- Source: Traktorenlexikon, “Oliver 1465”