5 material differences · fewer than 12
Tractor oneInternational Harvester Farmall 14561969–1971No measured PTO figureTractor twoOLIVER 21551970–1972No measured PTO figure
Which should you choose?
Read our verdict on the Farmall 1456 and the 2155 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
5 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | Farmall 1456 | 2155 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 132.2 hp | 141.1 hp | +7% 2155 |
| Engine declared | INTERNATIONAL HARVESTER DT-407 | — | — |
| Displacement declared | 6.67 L | — | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | Pedal-operated dry single-plate clutch | Foot-operated dry single-disc clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Closed centre | — |
| Pump flow declared | — | 20.0 gpm · 75.7 L/min | — |
| Rear PTO speeds declared | 1000 rpm | 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 12,800 lb · 5,806 kg | 12,050 lb · 5,466 kg | +6% Farmall 1456 |
| Wheelbase declared | 104.8 in · 2,662 mm | 104.5 in · 2,654 mm | — |
| Length declared | 164.0 in · 4,166 mm | 168.5 in · 4,280 mm | — |
| Width declared | 92.0 in · 2,337 mm | 95.0 in · 2,413 mm | — |
| Ground clearance declared | 23.5 in · 597 mm | 19.0 in · 483 mm | +24% Farmall 1456 |
| Turning radius, braked declared | 11.7 ft · 3.56 m | 10.8 ft · 3.28 m | +9% Farmall 1456 |
| Fuel tank declared | 168.0 qt · 159.0 L | 159.6 qt · 151.0 L | +5% Farmall 1456 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
International Harvester Farmall 1456 sources
- Source: Traktorenlexikon, “Farmall Farmall 1456”
- Source: Traktorenlexikon, “IHC 1026”
OLIVER 2155 sources
- Source: Traktorenlexikon, “Oliver 2155”