International Harvester Farmall 140 vs Schlüter DSU
6 material differences · fewer than 12
Which should you choose?
We will not advise between these two machines, because their unladen weight differs by more than 25% (40%); they were not built in overlapping years (1958–1979; 1947–1948). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
6 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | Farmall 140 | DSU | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 23.7 hp | 24 hp | — |
| Engine declared | INTERNATIONAL HARVESTER C-123 | — | — |
| Displacement declared | 2.01 L | — | — |
| Maximum torque declared | 106 lb·ft · 144 N·m | — | — |
| Transmission | |||
| Top speed declared | 12.4 mph · 20 km/h | 10.6 mph · 17 km/h | +18% Farmall 140 |
| Clutch declared | — | Single-disc dry clutch from Fichtel and Sachs type K 16 Z | — |
| Hydraulics & hitch | |||
| Pump flow declared | 4.6 gpm · 17.4 L/min | — | — |
| Rear PTO speeds declared | 541 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 3,000 lb · 1,361 kg | 4,189 lb · 1,900 kg | +40% DSU |
| Wheelbase declared | 71.0 in · 1,803 mm | 74.8 in · 1,900 mm | +5% DSU |
| Length declared | 107.0 in · 2,718 mm | 122.0 in · 3,100 mm | +14% DSU |
| Width declared | 56.0 in · 1,422 mm | 63.0 in · 1,600 mm | +13% DSU |
| Height declared | 65.5 in · 1,664 mm | 65.0 in · 1,650 mm | — |
| Ground clearance declared | 22.3 in · 566 mm | — | — |
| Turning radius, braked declared | 8.4 ft · 2.55 m | — | — |
| Fuel tank declared | 44.0 qt · 41.6 L | — | — |
International Harvester Farmall 140 sources
Source
- Source: Traktorenlexikon, “Farmall Farmall 140”
- Source: Traktorenlexikon, “McCormick Farmall Super-A 1”
- Source: Traktorenlexikon, “IHC Farmall 140”
Schlüter DSU sources
Source
- Source: Traktorenlexikon, “Schlüter DSU 25”