9 material differences · fewer than 12
Tractor oneInternational Harvester Farmall 12061965–1967No measured PTO figureTractor twoInternational Harvester 9861976–1981No measured PTO figure
Which should you choose?
Read our verdict on the Farmall 1206 and the 986 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | Farmall 1206 | 986 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 112.4 hp | 105.5 hp | +6% Farmall 1206 |
| Engine declared | INTERNATIONAL HARVESTER DT-361 | INTERNATIONAL HARVESTER D-436 | differs |
| Displacement declared | 5.91 L | 7.14 L | +21% 986 |
| Maximum torque declared | — | 315 lb·ft · 427 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | — | Pedal-operated Dyna-Life clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | — | 12.0 gpm · 45.4 L/min | — |
| Rear PTO speeds declared | 1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 10,115 lb · 4,588 kg | 13,029 lb · 5,910 kg | +29% 986 |
| Wheelbase declared | 104.8 in · 2,662 mm | 104.8 in · 2,662 mm | — |
| Length declared | 153.0 in · 3,886 mm | 167.0 in · 4,242 mm | +9% 986 |
| Width declared | 94.0 in · 2,388 mm | 102.0 in · 2,591 mm | +9% 986 |
| Ground clearance declared | 23.5 in · 597 mm | 13.0 in · 330 mm | +81% Farmall 1206 |
| Turning radius, braked declared | 10.9 ft · 3.33 m | 11.7 ft · 3.58 m | +8% 986 |
| Fuel tank declared | 140.0 qt · 132.5 L | 200.0 qt · 189.3 L | +43% 986 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
International Harvester Farmall 1206 sources
- Source: Traktorenlexikon, “Farmall Farmall 1206”
- Source: Traktorenlexikon, “IHC 1206”
International Harvester 986 sources
- Source: Traktorenlexikon, “IHC 986”
- Source: Traktorenlexikon, “IHC Hydro 100”