International Harvester D-432 vs John Deere-LANZ 310

11 material differences · fewer than 12

Tractor one

1962–1966

No measured PTO figure

Tractor two

1964–1968

No measured PTO figure

Which should you choose?

Read our verdict on the D-432 and the 310 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 4 fields identical or within 5%, which is not counted as material

International Harvester D-432 and John Deere-LANZ 310, field by field
Field	D-432	310	Gap
Engine
Engine power, claimed claimed	31.5 hp	31.5 hp	—
Engine declared	INTERNATIONAL-HARVESTER DD-132	John Deere 152 D 25 L	differs
Displacement declared	2.18 L	2.49 L	+14% 310
Maximum torque declared	90 lb·ft · 122 N·m	—	—
Transmission
Top speed declared	12.4 mph · 20 km/h	12.4–15.5 mph · 20–25 km/h	differs
Clutch declared	pedal-operated dry single-disc clutch	—	—
Hydraulics & hitch
Pump flow declared	4.1 gpm · 15.5 L/min	4.1 gpm · 15.6 L/min	—
Pressure declared	—	2,190 psi · 151 bar	—
Three-point lift at ends declared	3,307 lb · 1,500 kg	2,646 lb · 1,200 kg	+25% D-432
Rear PTO speeds declared	540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	3,294 lb · 1,494 kg	4,361 lb · 1,978 kg	+32% 310
Maximum permissible mass declared	—	5,864 lb · 2,660 kg	—
Wheelbase declared	74.0 in · 1,880 mm	81.6 in · 2,072 mm	+10% 310
Length declared	115.4 in · 2,930 mm	133.9 in · 3,400 mm	+16% 310
Width declared	64.6 in · 1,640 mm	62.2 in · 1,580 mm	—
Height declared	61.0 in · 1,550 mm	61.8 in · 1,570 mm	—
Ground clearance declared	15.0 in · 380 mm	15.7 in · 400 mm	+5% 310
Turning radius, braked declared	8.9 ft · 2.70 m	10.8 ft · 3.30 m	+22% 310
Fuel tank declared	58.1 qt · 55.0 L	74.0 qt · 70 L	+27% 310

Source

Source